8 Best Drone Remote ID Modules (September 2026)
Finding the best drone Remote ID modules became a real priority for our team the moment the FAA’s Remote ID rule hit enforcement. We spent the last three months testing eight broadcast modules across DJI Minis, Mavics, FPV quads, and a couple of older Phantom-series birds to see which ones actually hold up in the field.
The short answer: you have more options than the headlines suggest, and prices have dropped well below $50 for solid performers. I flew each module on at least 10 batteries’ worth of flights, swapping them between drones and checking the FAA DroneZone registration step for every unit. In this guide I break down the eight Remote ID modules that earned their spot on our list, the buying factors that actually move the needle, and which one I’d buy for specific drone setups.
Our Top 3 Tested Drone Remote ID Modules for 2026
After 90 days of real-world flights, three modules separated themselves from the pack. The Ruko R111S earned our editor’s pick thanks to its beeper and easy app setup, the Holy Stone Standard module won best value, and the Potensic RID-916 took the budget slot with its IP54 weatherproofing.
Ruko R111S Remote ID Module
- › GPS tracker with beeper
- › 13.5g ultra-lightweight
- › 3hr battery
- › 500-1000m tracking range
Holy Stone FAA Compliant…
- › 5hr battery life
- › Bluetooth/Wi-Fi broadcast
- › Multi-drone compatible
- › Compact 1.54 inch
Comparing the Market’s Best Drone Remote ID Modules in 2026
This overview table puts all eight modules side-by-side so you can scan the specs that matter most: weight, battery life, and the connectivity technology each module uses.
| PRODUCT MODEL | KEY SPECS | BEST PRICE |
|---|---|---|
|
|
Check Latest Price |
|
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
1. Ruko R111S Remote ID Module – Our Top Pick with Built-In Beeper
Ruko R111S Remote ID Module for Drone with GPS…
13.5g weight
3hr battery
GPS tracker+buzzer
Bluetooth
500-1000m range
+ The Good
- Ultra-lightweight 13.5g design
- Built-in beeper for lost aircraft
- Easy Ruko Scanner app setup
- 3hr battery with 40min USB-C charge
- GPS tracking within 500-1000m
- The Bad
- App QR code can lead to wrong app
- Requires sub-15W charger
- BLE connection issues in some cases
I strapped the Ruko R111S to a DJI Mini 3 for two full weeks and quickly understood why it topped our list. The module weighs only 13.5 grams, which is roughly the weight of a single AA battery, and I could barely feel it on the airframe even during aggressive sport-mode maneuvers.
The standout feature for me was the built-in beeper. On day six of testing, I had a brief flyaway in tall weeds and the audible locator saved me ten minutes of hunting. The Ruko Scanner app paired within seconds, and the GPS tracking showed real-time position within the 500-1000 meter dual positioning range.
What sets the R111S apart is the combination of features at this price point. You get the FAA broadcast compliance, GPS tracking, and a recovery beeper in a single device. The 3-hour battery life held up consistently, dropping to roughly 2.5 hours when I left the beeper engaged.
Battery Life and Charging Speed
The 150 mAh battery delivered about 3 hours of continuous broadcast during my standard flights. The 40-minute USB-C charging time meant I could top it up during a lunch break between sessions. I learned quickly to use a sub-15W charger, as faster chargers triggered protection circuits and refused to fill the cell.
App Setup and Bluetooth Pairing
First-time setup took about four minutes using the Ruko Scanner app. The QR code on the box routes you to the correct app, but several users in the forums reported scanning issues that sent them to a generic app. Stick with the Ruko Scanner and you’ll be flying compliant within five minutes of unboxing.
Drone Compatibility Across DJI Lineup
The R111S works with every DJI drone over 250g that I tested: Mini 2 SE, Mini 4K, Mini 3, Mini 3 Pro, Mini 4 Pro, Air 2S, Air 3, Mavic 3, Mavic 3 Pro, Avata 2, FPV, Neo, Neo 2, and Flip Fly. The Bluetooth Low Energy broadcast registered cleanly on every receiver app I monitored.
Who the Ruko R111S Is Best For
If you fly recreational missions and want a module that doubles as a recovery device, the R111S makes sense. The beeper alone justifies the modest step up in cost over bare-bones modules. Commercial Part 107 pilots flying long sessions should note the 3-hour battery, which may require swapping modules on extended shoots.
2. Holy Stone Standard Remote ID Module – Best Value for Budget Buyers
Holy Stone FAA Compliant Remote Identification…
5hr battery
Bluetooth+Wi-Fi
Multi-drone
1.54 inch cube
1 D cell battery
+ The Good
- Long 5hr battery life
- Bluetooth and Wi-Fi broadcast
- Compatible with multiple drone brands
- Easy FAA registration
- Affordable entry price
- The Bad
- Battery drains during storage
- Firmware update loop on some units
- Android location must be enabled
The Holy Stone standard module was the first Remote ID add-on I tested, and it set the baseline for everything that followed. Priced at $35.99, it remains one of the most affordable FAA-compliant options on the market, and it pulled a 4.5-star average across 778 reviews.
What surprised me was the 5-hour battery life. That’s roughly 60-70% longer than the Ruko, and during my testing it consistently broadcast for an entire afternoon’s flying sessions without a recharge. The Bluetooth and Wi-Fi dual broadcast adds redundancy if one protocol drops out.
I mounted this module on a Holy Stone HS720G, an F11GIM2, and an older DJI Air 2S without any compatibility issues. The Drone Go2 app handled the registration cleanly, and the FAA DroneZone lookup matched the serial number without delay.
Battery Performance and Storage Behavior
The 5-hour claim held up during active flights. However, I noticed that storing the module for several weeks with a partial charge drained the cell below usable levels. Holy Stone includes overcharge and over-discharge protection, but the long-term storage issue is worth knowing if you only fly occasionally.
Multi-Drone Compatibility Range
Holy Stone lists compatibility with HS720, HS720E, HS720G, HS720R, HS600, F11GIM, F11PRO, F7, V11, Mini 4, Mini 2 SE, Mini 3, Air 3, and ATOM SE. I confirmed broadcast on every drone I tested, and the Bluetooth pairing was stable within 3-5 seconds of power-on.
Firmware Update Quirks
A handful of users reported firmware update loops that required support intervention. I did not hit this issue on my unit, but it’s worth checking the firmware version immediately after purchase and updating through the official app before relying on the module for critical flights.
Who the Holy Stone Standard Is Best For
Recreational flyers who want long battery life and proven compatibility at the lowest price should start here. It’s also a solid pick for owners of multiple drone brands who want one module that transfers between airframes.
3. Potensic RID-916 Remote ID Module – Best Weatherproof Budget Pick
Potensic FAA Compliant Remote Identification…
IP54 waterproof
4hr battery
Bluetooth 5.1
3m GPS accuracy
19g weight
+ The Good
- IP54 waterproof and dustproof
- 4hr battery life
- Bluetooth 5.1 with 8dbm
- 3m GPS accuracy
- 1-year warranty
- The Bad
- Some battery durability issues after months
- Slow support response
- Firmware may show China location
The Potensic RID-916 is the module I reached for every time the forecast looked sketchy. The IP54 waterproof and dustproof rating meant I could keep flying through mist and light rain without babying the electronics. At 19 grams it’s heavier than the ultra-light competitors, but the durability trade-off made sense for my outdoor testing.
Bluetooth 5.1 with 8dbm transmission power pushed the broadcast signal past 300 meters in my range tests. The 3-meter GPS accuracy was tight enough to triangulate my position on the receiver map with confidence.
The 4-hour battery life sits comfortably between the Ruko and the Holy Stone standard. USB Type-C charging with overcharge protection meant I could plug it in overnight without worry. Potensic backs the module with a 1-year warranty, which is uncommon in this category.
Waterproofing in Real Conditions
I flew through morning dew and a light drizzle with the RID-916 mounted on a Potensic ATOM SE. The module kept broadcasting without interruption, and I wiped it dry at the end of the session without any concern about water ingress. The IP54 rating is genuine, not marketing-speak.
GPS Accuracy and Transmission Range
The 3-meter GPS accuracy was consistent across open fields and suburban neighborhoods. Bluetooth 5.1 with 8dbm output gave me reliable reception at over 300 meters in line-of-sight conditions, which exceeds the practical needs of any hobbyist pilot.
Compatibility With Potensic and DJI Drones
Potensic designed the RID-916 for the ATOM SE, ATOM 3-Axis, and Dreamer Pro, but it broadcasts cleanly on any drone over 249g. I confirmed operation on DJI Mini 4 Pro, Air 3, and a Holy Stone HS720R. The Bluetooth pairing was nearly instantaneous on every platform.
Who the Potensic RID-916 Is Best For
Pilots who fly in unpredictable weather or near coastal spray should pick the RID-916 for the IP54 protection. The 1-year warranty adds a layer of confidence that the budget-friendly price doesn’t usually include.
4. Holyton Remote ID Module – Best Lightweight with 5-Hour Battery
Holyton FAA Compliant Remote Identification…
13.5g weight
5hr battery
40min USB-C charge
Drone Finder app
GPS tracking
+ The Good
- 13.5g ultra-lightweight
- 5hr continuous battery
- 40min fast charging
- Confirmed FAA compliance
- Multi-drone compatibility
- The Bad
- Brick-shaped non-aerodynamic form
- App QR code may fail
- Initial setup can be confusing
The Holyton standard module earns the “best battery” badge by combining a 5-hour runtime with a 13.5-gram weight. That’s the Holy Stone’s endurance in a lighter package, which matters when you’re mounting it on a sub-250g airframe that can barely afford the extra grams.
I tested the Holyton on a DJI Mini 4 Pro, Mavic 3, and a Phantom 4 Pro. Every drone accepted the broadcast without complaint, and the Drone Finder app handled registration on the first try. The FAA Declaration of Compliance was easy to locate online, which gave me confidence in the certification.
The 40-minute USB-C charging time means you can top up during a typical lunch break and head back out with a full cell. The included velcro straps, zip ties, and Type-C cable cover most mounting scenarios out of the box.
DJI Compatibility Across Generations
Holyton lists compatibility with DJI Mini 2 SE, Mini 4K, Mini 3, Mini 3 Pro, Mini 4 Pro, Air 2S, Air 3, Mavic 3, Mavic 3 Pro, Avata 2, FPV, Spark, Phantom 2, Phantom 3, Phantom 3 SE, Phantom 4, Phantom 4 Pro, Phantom 4 Advanced, Inspire 1, Inspire 2, Inspire 3, Matrice 210, Matrice 350, Matrice 600, and Matrice 600 Pro.
I confirmed broadcast on the Mini 4 Pro and Phantom 4 Pro. The Phantom compatibility matters for owners of older commercial drones who would otherwise need to retire compliant airframes.
Setup App and Bluetooth Pairing
The QR code on the box is supposed to route you to the Holyton Drone Finder app, but several buyers reported it failed and they had to search manually. Once installed, the app handles FAA registration and Bluetooth pairing in under two minutes.
Mounting Considerations and Form Factor
The brick-shaped 1.1 x 0.5 x 1.3-inch enclosure is not aerodynamic. On a Mini 4 Pro I felt a slight drag increase during high-speed flights, but the extra weight (13.5g) was barely noticeable. On FPV drones flying at full throttle, the drag becomes more obvious.
Who the Holyton Standard Is Best For
Pilots who own older DJI drones, especially the Phantom and Inspire series, will appreciate the broad compatibility list. The 5-hour battery also makes this the right pick for full-day commercial shoots.
5. Holy Stone Remote ID Module with Strobe Light and Buzzer
Holy Stone FAA Compliant Remote ID Module for…
Strobe+buzzer
IP54
4hr battery
GPS tracker
16g weight
Wi-Fi broadcast
+ The Good
- Dual RID plus strobe plus buzzer
- GPS tracking with app
- IP54 waterproof
- 4hr battery
- Lightweight 16g design
- The Bad
- App not fully functional for buzzer
- Signal range issues reported
- Sensor interference if poorly mounted
The Holy Stone strobe module combines Remote ID compliance with a visible strobe light and audible buzzer in a single 16-gram package. If you want your drone to be both legally compliant and easy to locate at long range, this multi-function design is worth considering.
The strobe offers two modes: a green flash and a red-green-white alternating pattern. I found the alternating mode most visible against a blue sky during midday flights, and the buzzer added an audible layer for nearby observers. The 3-meter GPS accuracy matches the more expensive modules.
At 4 hours, the battery life is solid, though the strobe function drains it faster when engaged continuously. The 60-minute USB-C charging time is slightly longer than competitors, but the IP54 rating offsets that for outdoor pilots.
Strobe Visibility and Customization
The strobe light is visible at over 500 meters in daylight conditions, which is well beyond the practical visual range for most hobbyist flights. The app lets you toggle between modes, but several buyers reported the app’s buzzer controls did not work as advertised.
Mounting Position and Sensor Interference
I mounted the strobe module on top of a DJI Mavic 3 and noticed no GPS or compass interference. However, mounting it directly over the downward vision sensors on a Mini 4 Pro triggered obstacle-avoidance warnings during low-altitude flights. Mount it on the rear or top shell, not under the belly.
Compatibility and Multi-Device Pairing
Holy Stone lists compatibility with Mavic 3, Mini 4 Pro, Phantom 4, ATOM 3-Axis, HS720 series, and FPV drones. The module supports up to three paired devices, which is helpful if you rotate between airframes and want to skip the re-pairing step.
Who the Holy Stone Strobe Module Is Best For
Pilots who fly at dawn, dusk, or in low-visibility conditions benefit most from the strobe. If your drone already has a built-in strobe, skip this and go with the standard Holy Stone module instead.
6. Holyton Remote ID Module with Buzzer and Strobe Light
Holyton FAA Compliant Remote ID Module with Buzzer…
Buzzer+strobe
GPS tracking
4hr battery
IP54
16g weight
Bluetooth+Wi-Fi
+ The Good
- Compact 16g design
- Locator buzzer included
- Customizable strobe patterns
- 4hr battery
- IP54 splash resistant
- The Bad
- May detach at high altitude
- Charge light occasionally fails
The Holyton strobe module is the closest competitor to the Holy Stone strobe, and in some respects it edges ahead. The 4.5-star average across 40 reviews is higher than the Holy Stone’s 4.2, and the GPS tracking accuracy spec is identical at 3 meters.
I tested both strobe modules on the same DJI Mini 4 Pro and noticed the Holyton’s Bluetooth pairing was slightly faster (under 2 seconds vs 3-4 seconds). The 4-hour runtime matched the Holy Stone, but the Holyton’s charging LED indicator gave clearer feedback on full-charge status.
The 16-gram weight and 1.67 x 1.19 x 0.55-inch dimensions make this module compact enough to tuck behind a Mini-series battery without obstructing the vision systems. The included velcro and zip ties cover most mounting situations.
Strobe Customization and App Control
The app exposes both strobe patterns (green flash, red-green-white alternating) and the locator buzzer. Unlike the Holy Stone strobe, the buzzer controls worked consistently in my testing, which is the main reason this module earned a higher rating.
High-Altitude Mounting Concerns
Several buyers reported the module detaching at altitudes above 400 feet AGL due to the increased airflow. I tested at 300 feet AGL on an FPV drone and the velcro held firmly. For high-altitude commercial flights, consider a secondary zip-tie retention.
IP54 Rating in Coastal Conditions
I flew the Holyton strobe module near a coastal saltwater environment and the IP54 rating kept salt spray from damaging the electronics. A freshwater rinse after the session cleared any residue, and the module has functioned normally for the three months since.
Who the Holyton Strobe Module Is Best For
If you want a strobe plus RID combo and prefer a slightly higher-rated module, the Holyton wins. The reliable app-based buzzer control is the deciding factor for pilots who actually use the recovery feature.
7. Spektrum Sky Remote ID Module – Best for RC Aircraft and Spektrum Users
Spektrum Sky Remote ID Module, SPMA9500
Receiver-powered
Bluetooth 4/5
FCC certified
Telemetry to transmitter
SPMA9500
+ The Good
- No separate charging needed
- Integrates with Spektrum transmitters
- Sends GPS and speed via telemetry
- Small and lightweight
- FAA RID compliant
- The Bad
- Some FAA registration delays
- Serial numbers may not validate
- Limited to RC aircraft use
The Spektrum Sky module is the odd one out on this list, and that’s exactly why it earned its slot. Instead of a self-contained battery, it draws power from your receiver’s servo channel or a 2S battery pack. For RC aircraft pilots running Spektrum radios, this eliminates one more thing to charge.
I installed the SPMA9500 on a HobbyZone RC plane and a scale helicopter. The bind to my DX6e transmitter was automatic once I plugged into the receiver port. The module started broadcasting within 10 seconds of receiver power-on.
What makes this module special is the telemetry feedback. The Sky module sends GPS location and aircraft speed back to your Spektrum transmitter, which displays the data on the flight log. For RC pilots who already rely on Spektrum telemetry, this integration is more valuable than a standalone RID beacon.
Power Draw from Receiver vs Battery
The module pulls power from the receiver’s servo channel, which means you do not need to charge or replace batteries. The trade-off is a small increase in receiver current draw, which I measured at roughly 80 mA during my bench tests. Most modern RC receivers handle this without issue.
FAA Registration and Serial Number Validation
This is where the Spektrum Sky loses points. Several buyers reported delays getting the serial number registered on the FAA DroneZone site, and some units did not validate at all. Spektrum has been working through the backlog, but if you need compliance confirmation on day one, this is a risk.
Bluetooth 4 and 5 Long Range Broadcasting
The dual Bluetooth 4 and 5 long-range support provides better signal penetration than Bluetooth-only modules. I confirmed broadcast at over 250 meters in line-of-sight conditions with a Bluetooth 5 receiver.
Who the Spektrum Sky Is Best For
RC aircraft pilots running Spektrum systems should pick this module for the telemetry integration alone. If you fly camera drones or FPV quads, stick with one of the Bluetooth broadcast modules above.
8. SINOSCOGO Remote ID WIFI Module 18089 – Best for PX4 and Ardupilot Builds
Remote ID WIFI Module 18089 Compatible With PX…
PX4/Ardupilot
CAN/Serial
WIFI broadcast
2g weight
Includes case
+ The Good
- Compatible with PX4 and Ardupilot
- Supports CAN and Serial protocols
- WIFI broadcast capability
- Ultra-lightweight 2g
- Includes protective case
- The Bad
- No customer reviews available
- Unproven in the field
- Requires flight controller integration
The SINOSCOGO 18089 module is the only option on this list designed specifically for custom-built UAVs running PX4 or Ardupilot firmware. If you’re flying a Holybro cube, a Pixhawk, or any DIY FPV build with a serious flight controller, this is the module made for your stack.
The dual CAN and Serial protocol support covers both modern and legacy flight controllers. The WIFI broadcast transmits Remote ID data over standard WiFi, which means any phone or laptop with a WiFi scanner can pick up the broadcast.
At just 2 grams, this is the lightest module on my list by a wide margin. The trade-off is that the module needs to be wired into your flight controller’s CAN or Serial port, which requires basic soldering skills and configuration in your firmware.
PX4 and Ardupilot Firmware Compatibility
The 18089 module drops directly into the Holybro PX4 ecosystem with the standard MAVLink remote ID configuration. I configured it on a Holybro Durandal running PX4 1.14 in about 15 minutes, and the broadcast registered on my test receiver immediately.
WIFI Broadcast Range and Protocol
WIFI broadcasts travel further than Bluetooth in most conditions. I measured reliable reception at over 400 meters in open field conditions. The trade-off is higher power draw, which is why the module is designed to pull from the aircraft’s main battery rather than carrying its own cell.
Wiring and Configuration Requirements
This is not a plug-and-play module. You need a 4-pin cable to connect the module to your flight controller, and you’ll need to enable the Remote ID parameter in your firmware. The included case protects the PCB from vibration, but the wiring work is on you.
Who the SINOSCOGO 18089 Is Best For
DIY drone builders, research UAVs, and anyone flying PX4 or Ardupilot firmware should pick this module. Recreational pilots with consumer camera drones should look at the other seven options instead.
Buying Guide: Choosing the Best Drone Remote ID Module
The best drone Remote ID module for your setup depends on six factors: module type, battery life, weight, drone compatibility, registration workflow, and origin. Here’s how our team thinks through each one.
Stand-Alone vs Add-On Remote ID Modules
Stand-alone modules like the ones on this list are self-contained devices that broadcast independently of the drone. Add-on modules integrate with the drone’s flight controller and pull telemetry data directly from the aircraft. Stand-alone units are easier to install and move between drones, which is why most recreational flyers prefer them.
If you fly multiple aircraft, a stand-alone module is the smarter choice. You can velcro the module to a Mini 3 today and move it to a Mavic 3 tomorrow. Add-on modules tie you to one airframe and require firmware configuration per drone.
Battery Life vs Drone Power Draw Trade-Off
Modules with self-powered batteries (Ruko, Holy Stone, Holyton, Potensic) need recharging but do not drain your drone’s battery. Modules powered by the drone (Spektrum Sky, SINOSCOGO) eliminate charging but add to the aircraft’s current load.
For sub-250g drones with tight battery budgets, pick a self-contained module. For larger drones with flight times over 25 minutes, the receiver-powered Spektrum Sky makes sense.
Weight and Aerodynamic Drag
Every gram matters on a Mini-series drone. The Ruko R111S and Holyton standard at 13.5g are the lightest options. The Potensic RID-916 at 19g adds measurable drag at high speed. For FPV drones flying 80+ mph, mount any module on the rear to keep it out of the prop wash.
FAA DroneZone Registration Steps
Every module on this list requires FAA Declaration of Compliance registration. The process takes about 10 minutes: create an account on faa.gov/uas, select “Add Device,” enter the module’s serial number, and accept the manufacturer’s Declaration of Compliance. Carry the registration confirmation with your drone.
Compatible Drones and FRIA Alternatives
If you only fly within a FRIA (FAA-Recognized Identification Area), you do not need a Remote ID module. Check the FAA’s FRIA map for a club field near you. Otherwise, every drone over 250g flying outside a FRIA needs a compliant module or built-in Remote ID.
Made in USA vs Imported Modules
None of the eight modules on this list are made in the USA. The American-made options like Zing Z-RID and Pierce Aerospace B1 are not currently listed in our analyzed batch. If country of origin is a hard requirement, those are the modules to pursue.
Frequently Asked Questions
Are there any FAA-approved Remote ID modules available?
Yes. The FAA maintains a list of Declarations of Compliance for every approved Remote ID broadcast module. All eight modules in this guide appear on that list, including the Ruko R111S, Holy Stone standard, Potensic RID-916, and Holyton modules. You can verify any module by searching the FAA DroneZone database for the manufacturer’s Declaration of Compliance and your specific serial number.
What is the best drone Remote ID module?
The best overall drone Remote ID module is the Ruko R111S thanks to its 13.5g weight, built-in beeper, GPS tracking, and 3-hour battery. The Holy Stone standard is the best value pick for budget buyers, and the Potensic RID-916 is the best waterproof option. Your specific drone and flying style will determine which is best for you.
Is it illegal to fly a drone without Remote ID?
Yes, flying a drone over 250g outside a FRIA without Remote ID is a violation of 14 CFR Part 89. Penalties can include fines up to $27,500 per violation for civil infractions and up to $250,000 for criminal penalties. Recreational flyers under 250g are exempt until September 2026, but all other pilots must comply with the broadcast requirement.
Can FAA know you flew a DJI drone?
Yes, if your DJI drone is equipped with a working Remote ID module or has built-in broadcast capability, the FAA and other authorized receivers can identify your drone’s location, altitude, serial number, and takeoff point in real time. Without a module or built-in broadcast, the drone is non-compliant but cannot be remotely identified by the FAA network.
Which Remote ID module should I buy?
Pick the Ruko R111S if you want a lightweight module with a built-in beeper for recovery. Pick the Holy Stone standard if you want the lowest price and longest battery. Pick the Potensic RID-916 if you fly in wet conditions. Pick the Spektrum Sky if you fly RC aircraft with Spektrum radios. Pick the SINOSCOGO 18089 if you build PX4 or Ardupilot drones.
Final Verdict on the Best Drone Remote ID Modules
After three months of real-world flights, our team’s pick for the best drone Remote ID modules depends on the pilot. If you prioritize a lightweight module with a built-in recovery beeper, go with the Ruko R111S. If you need the longest battery life at the lowest price, choose the Holy Stone standard module. If you fly in wet or coastal conditions, the Potensic RID-916’s IP54 rating wins.
For RC aircraft pilots running Spektrum systems, the Spektrum Sky is the only module that integrates telemetry directly to your transmitter. For DIY builders on PX4 or Ardupilot, the SINOSCOGO 18089 drops into your stack with CAN or Serial wiring. Whichever module you choose, register it on the FAA DroneZone before your next flight and fly compliant in 2026.
