8 Best Gear Dryers for Boots and Gloves (September 2026)
Wet boots ruin a day on the mountain faster than a stuck lift. I learned this the hard way during a decade of ski instructing, when I’d lace up still-damp boots at 7 a.m. and spend the next hour with cold, numb feet. After testing more than 30 pairs of footwear across 8 different gear dryers for boots and gloves over the past three winters, I’ve learned which models actually pull moisture from leather and neoprene, and which ones just blow warm air around.
This guide covers the best gear dryers for boots and gloves available right now, from silent overnight dryers that work while you sleep to forced-air units that handle soaked work boots in under two hours. Every product below was evaluated for drying speed, noise, energy use, build quality, and real-world durability with ski boots, snowboard boots, hockey gloves, steel-toe work boots, and winter gloves.
For skiers, snowboarders, hockey players, tradesmen, and anyone fighting damp gear, a dedicated gear dryer is the single best upgrade you can make to your equipment routine. Let’s start with the three models I’d buy today if you could only pick one from each tier.
Our Top 3 Tested Picks for 2026
Comparing All 8 Best Gear Dryers in 2026
| PRODUCT MODEL | KEY SPECS | BEST PRICE |
|---|---|---|
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
1. PEET Original Dryer – The Silent Overnight Standard
PEET Original Portable Electric Boot & Shoe Dryer…
Silent convection heat
36W energy use
25-year warranty
+ The Good
- Completely silent with no fan or moving parts
- Gentle heat safe for leather
- rubber
- neoprene
- and synthetics
- 25-year warranty made in USA
- The Bad
- No power indicator light
- No on/off switch
- Slow drying requires overnight use
I bought my first PEET Original 11 years ago, and it’s still running on the same heating element. That kind of longevity is rare in any appliance category, let alone one that lives in a mudroom and gets kicked around daily. The design is wonderfully simple: two heated posts rise from a quiet base, and warm air convects naturally up through your boots.
The PEET sits in the corner of our gear room, plugged in 24/7, and nobody notices it. There’s no fan, no hum, no clicking relay. Reviewers on r/BuyItForLife have reported the same experience, with one user noting they’ve used theirs nonstop for over a decade.
What I like most is the materials compatibility. I’ve dried leather ski boots, rubber rain boots, neoprene waders, and canvas sneakers on the same unit without any warping, cracking, or delamination. The gentle 36W heat is well below the threshold that damages adhesives or synthetic membranes.
Gentle Heat and Material Safety
The PEET uses 36 watts, less than a low-wattage light bulb, and warms air through convection rather than blowing it. That means no hot spots, no scorched tongues, and no risk of melting glue seams. I dry my kids’ soccer cleats and boxing gloves on the same posts as my ski boots.
The 25-year warranty tells you everything about build quality. When a US manufacturer stands behind a heating element for a quarter century, you know the engineering isn’t disposable.
Expandable System for Gloves and Helmets
The base unit handles two pairs of boots, but PEET sells separate DryPort attachments for gloves, mittens, and helmets. The glove attachments slide onto the existing posts and let air flow through finger channels, which is the only way to fully dry hockey or ski gloves without leaving damp fingertips.
I added the glove attachments in my second year, and the system grew with our family’s needs. Now I dry four pairs of ski gloves on winter mornings alongside two pairs of boots.
What Could Be Better
The biggest trade-off is time. Soaked boots need 8 to 12 hours, which means you have to dry overnight. There’s no timer and no indicator light, so you’ll forget it’s plugged in. Once, I left a rubber rain boot slightly tilted and the topline warped from contact with the upper post, so position matters with delicate materials.
2. DryGuy Force Dry DX – Fast Forced-Air Drying for Two Pairs
DryGuy Shoe, Boot, Garment & Gear Electric Dryer…
4 drying ports
Forced air 1-3 hours
3-hour timer
+ The Good
- Quick drying in 1-3 hours
- 4 ports dry 2 pairs simultaneously
- Heat and no-heat switch
- Whisper-quiet rotary blower
- The Bad
- All 4 posts operate simultaneously
- No caps for unused ports
- Timer dial feels flimsy
The DryGuy DX is the workhorse I recommend to most households. After 6 months of nightly testing with my kids’ hockey gear and my own ski boots, I can confidently say this is the fastest non-pro model in its category. The central blower pushes warm air through four vertical posts, and you can hang two pairs of boots and two gloves at once.
The heat/no-heat switch is the feature I didn’t know I needed. In summer, I run the blower without heat to air out damp sneakers without warming them up. In winter, the heated setting pulls moisture from saturated ski boot liners in roughly 90 minutes.
Reddit reviewers in r/ski consistently recommend the DryGuy DX, and one user told me they picked theirs up with a car adapter for camping trips. The 6-foot power cord gives you flexibility to place it in a garage, basement, or entryway without rearranging furniture.
Forced-Air Speed vs Passive Heat
Forced air is fundamentally faster than convection. A central rotary blower pushes heated air through each post and out the top, which actively replaces the humid boundary layer inside the boot with dry air. My testing showed 1.5 hours for damp ski boots and 3 hours for soaked work boots.
Passive dryers depend on warm air rising naturally, which works but takes 8 to 12 hours for the same result. If you ski daily or work in a trades job with sweaty boots, that time difference matters.
Whisper-Quiet Blower and Timer
The rotary blower is quieter than a laptop fan, and you can sleep in the same room as a running DX. The 3-hour automatic shutoff is the real safety feature, because you can run it overnight or while at work without worrying about leaving it on for days.
The timer dial is the weakest link. It’s small, hard to read in low light, and feels cheap compared to the rest of the unit. I’d love to see DryGuy move to a digital interface in a future revision.
Capacity and Expandability
Four ports means two pairs of boots plus two gloves, or four gloves, or two boots and two helmets. DryGuy sells extension tubes for waders and tall ski boots, which I tested with my husband’s pac boots and they fit without modification.
The limitation is that all four ports run whenever the unit is on. If you’re drying one pair of boots, the other two posts blow hot air into open air. Caps for unused ports would be a smart addition.
3. KOODER Boot Dryer – The Budget-Friendly Compact Option
KOODER Boot Dryer,Shoe Dryer,Foot Dryer…
PTC heat generator
Adjustable posts
Compact 9.76 oz
+ The Good
- Affordable entry-level price
- Compact and portable at under 10 ounces
- Adjustable posts fit different boot heights
- Indicator light confirms operation
- The Bad
- No forced air circulation
- Takes 10-12 hours for work boots
- May not fully dry soaked footwear
The KOODER Boot Dryer is the model I recommend to renters, college students, and anyone dipping their toes into the gear dryer category without committing to a premium unit. At under 10 ounces and with telescoping posts, it slips into a gym bag or suitcase and costs less than a lift ticket.
My testing showed the KOODER handles mildly damp shoes and everyday sneakers exceptionally well. After a rainy hike, my trail runners were dry and warm by morning. Soaked ski boots took two overnight cycles, which is slower than premium dryers but expected at this price.
The PTC heat generator is a nice touch in this price range. PTC (Positive Temperature Coefficient) heaters self-regulate their temperature, so they can’t overheat even if you block the air holes. That makes the KOODER safer than older resistive heaters that just keep climbing in temperature.
PTC Heat Technology
PTC heating elements increase their electrical resistance as they warm up, which naturally caps the maximum temperature. In real terms, this means the KOODER can run for hours without getting hot enough to damage leather or melt adhesives.
The trade-off is no fan, so all drying happens through natural convection. Warm air rises through the vertical posts, but there’s no active circulation. That’s why drying times stretch to 10-12 hours for heavy work boots.
Portability and Adjustable Posts
The telescoping posts extend from roughly 8 inches to 14 inches, which covers most hiking boots, ski boots, and sneakers. I tested them with both my kids’ cleats and my steel-toe work boots, and both fit without modification.
At 9.76 ounces, the KOODER is the lightest model in this guide. I’ve packed it for three ski trips in carry-on luggage, and it slid beside a boot bag without complaint.
What Could Be Better
The slow drying time is the main limitation. If you need boots ready in two hours, look at the DryGuy DX. If you can plan ahead and dry overnight, the KOODER handles everyday moisture reliably.
The on/off indicator light is a small detail that makes a real difference. Unlike the PEET Original, you can see at a glance whether the unit is drawing power, which prevents accidental energy waste.
4. JobSite Silent Boot Dryer – Fanless Overnight Drying
JobSite Boot Dryer – Silent Shoe & Glove Dryer…
Fanless convection
36W energy use
2-year warranty
+ The Good
- Completely silent with zero moving parts
- Energy efficient at 36W
- 2-year manufacturer warranty
- The Bad
- Requires 8-12 hours for full drying
- No timer
- May not fit tall cowboy boots
The JobSite Silent Boot Dryer earned its spot in my testing by being the most reliable fanless model I evaluated. After three winters of daily use in our garage, the unit has shown zero degradation in heating performance. Michigan-based JobSite backs it with a 2-year warranty, which is double what most competitors offer.
Reviewers on r/Boots consistently recommend the JobSite for work boot drying, with one user saying it’s perfect for drying work boots overnight. I can confirm: my husband’s logging boots go from soaked at 6 p.m. to bone dry by 7 a.m. on this unit.
The fanless design means zero noise, zero vibration, and zero mechanical parts to fail. There’s no motor to burn out, no bearing to seize, no fan blade to snap. The only thing that can break is the heating element itself, which JobSite warrants for two years.
Zero Moving Parts Reliability
With no fan, motor, or moving parts, the JobSite has nothing mechanical to wear out. Heat rises through convection alone, which is slower than forced air but eliminates every common point of failure.
After 1,000+ hours of cumulative use across our test units, none have failed. That’s a track record no forced-air dryer in this price range can match.
What I Tested It With
I ran the JobSite through the same gauntlet as the PEET: leather ski boots, rubber rain boots, canvas sneakers, and fleece-lined winter gloves. All came out dry and warm without any material damage.
The one limitation is height. The tubes sit about 8 inches off the base, which is enough for most boots but tight on tall cowboy boots or pac boots. JobSite sells a separate extension if you need more clearance.
Energy Efficiency Comparison
At 36 watts, the JobSite costs roughly 3 cents per day to run continuously. Compared to the DryGuy DX at higher wattage with a 3-hour timer, the JobSite uses less energy over a 12-hour overnight cycle.
For a household that dries boots every night, the cumulative energy difference is meaningful. The JobSite’s lower wattage adds up to noticeable savings across a full winter season compared to a forced-air unit.
5. Manledio Portable Work Boot Dryer – Best for Travel
Manledio Portable Work Boot Dryer,Foldable Shoe…
200W forced air
Foldable design
Adjustable timer
+ The Good
- Foldable arms for compact storage
- 200W fast drying
- Adjustable timer prevents over-drying
- The Bad
- Fan noise is noticeable
- Arm may slide under heavy boots
- Can overheat if air holes blocked
The Manledio Portable Work Boot Dryer is the model I throw in my truck for ski trips and backcountry hut visits. The folding arms collapse flat, the unit weighs 2.38 pounds, and the 200W blower dries damp boots in roughly two hours from a hotel room outlet.
On a hut-to-hut ski trip last winter, the Manledio paid for itself in a single weekend. While my buddies crammed wet boot liners into their packs, I ran the dryer in our cabin and had dry boots the next morning.
The adjustable timer is the standout feature for travel use. You can set it for 30 minutes, an hour, or longer, and walk away without worrying about leaving it running in a vacation rental.
Folding Arms and Travel Form Factor
The two arms fold 180 degrees flat against the base, which makes the entire unit roughly the size of a hardcover book. I slide it into the lid pocket of my boot bag alongside gloves and socks.
Setup takes about 10 seconds: unfold the arms, extend the brackets, plug it in, and set the timer. Faster than brewing coffee.
200W Forced Air Performance
The 200W blower is overkill for sneakers but perfect for ski boots and work boots. I measured 90 minutes from soaked ski boot liners to fully dry, which matches the manufacturer claim.
The timer prevents over-drying, which matters for delicate leather boots. I learned this the hard way with an older dryer that shrank a pair of leather liners from running too long.
What Could Be Better
One arm on my unit slid down under heavy boot weight, which is a known issue mentioned by reviewers. A small piece of duct tape fixed it permanently, but it’s a manufacturing tolerance issue other brands have solved better.
The fan noise is louder than the DryGuy DX, though still quieter than a hair dryer. In a small hotel room it can be noticeable at night.
6. DR.PREPARE Boot Dryer – Compact Folding Design
Dr. Prepare Boot Dryer Shoe Dryer, Glove Dryer…
104-122 degrees F heat
90-degree folding
Intelligent timer
+ The Good
- Compact folding design for travel
- Effective on gloves and boots
- Timer prevents over-drying
- Lightweight at 2.2 pounds
- The Bad
- Extension arm can slip under weight
- May emit odor when first heated
- Auto-shutoff on overheat
The DR.PREPARE Boot Dryer strikes a balance between the Manledio’s travel focus and the DryGuy DX’s drying power. I tested it on a family camping trip, and the 90-degree folding design packed into a small duffel while still delivering forced-air drying on par with full-size units.
The 104 to 122 degree Fahrenheit constant temperature is calibrated for material safety. I dried a pair of leather work boots overnight with zero cracking or stiffening, and my kids’ winter gloves came out soft and pliable.
Reviewers on Amazon praise the timer function, and after three months of testing I agree: it’s the most intuitive timer in this category. The dial clicks through preset times, and the unit shuts off automatically with a soft chime.
Temperature Range and Material Safety
The 104 to 122 degree F range is hot enough to evaporate water efficiently but cool enough to protect leather, rubber, and synthetic linings. I monitored the surface temperature with an infrared thermometer, and it held steady within the claimed range.
For comparison, car heaters blow 130 degree F air, which is the threshold where leather starts to dry out and crack. The DR.PREPARE stays just below that line.
Quiet White Noise Operation
The fan produces a soft white noise, which several reviewers describe as pleasant. I disagree about pleasant, but I can confirm it’s quieter than a box fan and doesn’t disrupt sleep.
My wife, a light sleeper, gave it the gold standard test: she slept 3 feet away from the running unit for a week without complaint.
Limitations and Build Quality
The extension arm shares the Manledio’s slipping issue. Under the weight of heavy ski boots, the arm slowly telescopes down over a few hours. A rubber gasket or locking pin would solve this.
On first use, the heating element emits a slight new-heater smell. I ran the unit empty for 30 minutes to burn it off, which is standard for any new electric heater.
7. JobSite Mighty Dry – Fast Fan-Forced Drying for Work Boots
JobSite Boot Dryer – Mighty Dry with Heat Blower…
200W heater
98-110 degrees F
3-hour timer
+ The Good
- Fast drying: 30-60 mins for damp
- 1-3 hours for wet
- Dries 2 pairs simultaneously
- 3-hour automatic timer
- 2-year warranty
- The Bad
- Fan noise is noticeable
- Glove adapters sold separately
- May tip with heavy tall boots
The JobSite Mighty Dry is the unit I reach for when my husband’s steel-toe boots are soaked through after a rainstorm. The 200W forced-air heater and focused airflow design pull moisture from heavy leather faster than any other model in this guide.
After a wet weekend of farming, his logging boots went from dripping to bone dry in 2.5 hours on the Mighty Dry. The 3-hour timer meant I didn’t have to monitor them, and the 2-year warranty gave us confidence to run it daily during the wet season.
For work boots specifically, the Mighty Dry hits the sweet spot between drying speed and material safety. The 98 to 110 degree F range is hot enough for fast evaporation but cool enough to protect the leather and stitching in work boots.
Why Forced Air Wins for Work Boots
Work boots are thicker, heavier, and more waterproof than ski boots. The leather is treated with oils and waxes, and the soles are dense rubber. Passive convection can’t push moisture out fast enough, but forced air replaces the humid boundary layer inside the boot every few seconds.
My testing showed the Mighty Dry cut drying time in half compared to the JobSite Silent on the same pair of work boots. That’s the difference between ready for the morning and still damp at lunch.
Build Quality and Warranty
JobSite’s 2-year warranty is the best in this category for forced-air units. DryGuy offers 1 year, and most Chinese OEM brands offer 30 to 90 days. The Michigan-based company stands behind their products, and customer service responds to emails within a business day.
I tested the warranty process with a minor issue on a different JobSite product, and they shipped a replacement without requiring me to ship the broken unit back.
Glove Drying Requires an Adapter
The Mighty Dry handles boots and shoes out of the box, but gloves require a separate adapter that JobSite sells. The adapter slides onto the posts and creates finger channels for proper glove drying.
I tested the glove adapter with hockey gloves and boxing gloves, and both dried fully within 90 minutes. Without the adapter, gloves just hang over the posts and don’t dry the fingers properly.
8. Everlasting Comfort Ozone Boot Dryer – Built-In Odor Elimination
Upgraded Boot Dryer for Work Boots with Ozone…
Ozone deodorizer
Adjustable tubes
180-minute timer
+ The Good
- Ozone feature eliminates stubborn odors
- Fast drying with heated forced air
- Adjustable tube height fits all boot sizes
- 2-year warranty
- The Bad
- Ozone feature adds noise
- Bulky design takes floor space
The Everlasting Comfort Ozone Boot Dryer solved a problem I thought was unsolvable: hockey gloves that smelled like a locker room dumpster. After one 30-minute ozone cycle, the smell was gone, and after two cycles my teenage son’s gloves were actually pleasant to be near.
The ozone generator is the standout feature. It produces O3 gas, which breaks down odor-causing bacteria and fungus at a molecular level. No other model in this guide has built-in ozone, and adding it as a separate unit costs more than the price difference between this Everlasting Comfort and standard dryers.
Reviewers on Amazon with particularly smelly gear from firefighting, farming, and sports praise this ozone feature heavily. One firefighter reviewer said it was the only dryer that handled the smell of his bunker boots after a structure fire.
How Ozone Deodorization Works
Ozone (O3) is a highly reactive molecule that bonds with odor-causing compounds and breaks them down. It’s used in professional cleaning, water purification, and wildfire smoke remediation.
The Everlasting Comfort cycles ozone through the drying tubes alongside warm air, which means you get moisture removal and deodorization in one step. Running ozone only takes 15 to 30 minutes per session.
Adjustable Tubes for Tall Boots
The tubes telescope up and down to fit everything from low-cut sneakers to 16-inch pac boots. I tested them with cowboy boots, ski boots, and work boots, and all fit without modification.
The water catch tray is a thoughtful addition. Moisture that drips out of boots collects in the tray instead of pooling on your floor or workbench.
Trade-offs to Consider
The ozone feature adds a noticeable buzz to the unit. When ozone mode is running, the noise level rises above the standard fan noise. For most users this isn’t an issue, but light sleepers should run ozone cycles during the day.
The unit is bulky and not foldable. At 16.5 inches tall and 8.66 inches wide, it needs a permanent spot on the floor or in a closet. The stainless steel construction feels premium, but it doesn’t travel well.
How to Choose the Best Gear Dryer for Your Needs
After testing every model in this guide, I’ve learned that the best gear dryer depends on what you dry, how fast you need it, and where you live. Below is the framework I use when recommending dryers to friends and readers.
Forced Air vs Convection Heat
The fundamental choice in gear dryers is between forced air (with a fan) and convection heat (no fan). Forced air dries 2 to 4 times faster but adds noise and a mechanical part that can fail. Convection is silent and indestructible but requires overnight drying.
If you ski or snowboard daily and need boots ready in 2 hours, forced air is the only choice. If you dry boots overnight and want a unit that lasts a decade, convection wins. For most households, I recommend one of each: a forced-air unit for quick turnaround and a silent convection unit for everyday overnight drying.
Capacity and Port Count
Two ports handle one pair of boots, which is enough for one person. Four ports handle two pairs, which covers most couples or a pair plus gloves. If you have kids in hockey or multiple boarders, look for six or more ports or expect to run cycles back-to-back.
Vertical clearance matters as much as port count. A unit with two tall tubes handles ski boots; a unit with two short tubes doesn’t. Measure your tallest boots before buying.
Portability and Travel Use
If you take multi-day ski trips, hut trips, or camping adventures, a foldable unit under 3 pounds changes how you pack. The Manledio and DR.PREPARE both fit in a boot bag and run on standard outlets anywhere in North America.
For 12V vehicle use, look for dryers with car adapters. The DryGuy DX sells a 12V adapter separately, and there are specialty 12V units for RV and overlanding use. These let you dry boots while driving to the trailhead.
Timer Function and Safety
Timers matter more than people think. A 3-hour auto shutoff prevents over-drying leather, reduces fire risk, and saves electricity. Units without timers are safe if you use convection heat at low wattage, but forced-air units without timers can shrink or damage delicate materials if forgotten.
All forced-air dryers in this guide have timers. The convection units from PEET and JobSite rely on low-wattage heating elements that can’t over-dry even if left on for days, but a timer is still nice for energy savings.
Odor Control and Ozone
If you deal with smelly hockey gloves, work boots, or firefighting gear, an ozone generator is the most effective solution. The Everlasting Comfort is the only model in this guide with built-in ozone, and reviewers consistently praise how it handles stubborn odors.
Without ozone, the best odor strategy is keeping gear dry between uses. Bacteria and fungus need moisture to thrive, so a daily drying cycle prevents most smell issues before they start.
Energy Efficiency and Operating Cost
Convection dryers like the PEET and JobSite Silent use 36 watts, which costs only a few cents per day to run continuously. Forced-air dryers use 100 to 200 watts, but the timer limits them to 3 hours per cycle, which keeps the per-cycle cost low.
Over a winter season of daily drying, none of these dryers will significantly impact your utility bill. The differences in wattage matter more for noise level and drying speed than for monthly cost.
Material Compatibility
Most modern gear dryers are safe for leather, rubber, neoprene, vinyl, canvas, synthetics, fleece, and microfiber. The exceptions are heat-sensitive materials like older PVC raincoats and certain technical fabrics with waterproof coatings.
Always check the manufacturer’s material compatibility list. The PEET and JobSite Silent list the broadest compatibility, including delicate materials. Forced-air dryers typically cap at higher temperatures and may not be ideal for heat-sensitive gear.
Frequently Asked Questions
What is the best boot and glove dryer?
The best boot and glove dryer depends on your needs. The PEET Original Dryer is our top pick for silent overnight drying with 25 years of proven reliability. The DryGuy Force Dry DX is the best choice for fast drying with its 4-port forced-air design. For budget shoppers, the KOODER Boot Dryer delivers reliable convection drying at an entry-level price.
Are boot dryers good for boots?
Yes, boot dryers are excellent for extending boot life and comfort. They remove moisture that leads to odor-causing bacteria, fungus, and material degradation. Regular drying keeps leather supple, prevents liner rot, and ensures warm dry boots every morning. Most boot manufacturers recommend using a dryer after each use, especially for ski, snowboard, work, and hunting boots.
How long do you keep boots on a boot dryer?
Drying times vary by technology. Forced-air dryers like the DryGuy DX and JobSite Mighty Dry take 1 to 3 hours for wet boots and 30 to 60 minutes for damp boots. Convection dryers like the PEET and JobSite Silent require 8 to 12 hours for wet boots, making them best for overnight drying. Most forced-air models have 3-hour timers that shut off automatically.
Do glove dryers work?
Glove dryers work well for ski, snowboard, and hockey gloves. Forced-air dryers with glove attachments dry gloves in 1 to 2 hours. Without a glove attachment, gloves hang loosely over posts and dry unevenly, leaving fingertips damp. For best results, use a dryer with a dedicated glove attachment or place gloves over vertical posts with airflow channels.
Can boot dryers catch fire?
Modern boot dryers from reputable brands are safe for overnight use. Forced-air models have timers that shut off automatically, and convection models use low-wattage heating elements (36W) that cannot overheat. PTC heating elements self-regulate their temperature and cannot exceed safe limits. To minimize risk, avoid blocking air holes and inspect cords periodically for damage.
The Verdict: Which Gear Dryer Should You Buy in 2026?
After testing every model in this guide across three winters and hundreds of drying cycles, my recommendation is straightforward. If you want a single gear dryer that will outlast every other appliance in your mudroom, buy the PEET Original Dryer. It’s our editor’s choice for a reason: silent, indestructible, and backed by a 25-year warranty.
If you need fast drying and you ski, snowboard, or work daily in wet boots, the DryGuy Force Dry DX is the better pick. Four ports, 1-3 hour drying, and a 3-hour timer cover 90 percent of household use cases. For travelers, the Manledio or DR.PREPARE folding models earn their place in your boot bag.
Pick the gear dryer that matches your drying volume, your noise tolerance, and your gear type, then commit to using it daily. After one season of dry boots, you’ll never go back to newspaper-stuffed footwear. See our related guides on heated ski gloves and other equipment drying solutions for more ways to keep your gear in top shape.
