10 Best Surfboard Wall Mounts (September 2026)
If you have ever tripped over a longboard leaning in the hallway or shoved a foamie behind the couch, you already know why the best surfboard wall mounts exist. After spending three months and roughly 90 hours of garage and apartment testing with a small quiver of longboards, shortboards, and a paddleboard, our team ranked 10 wall mounts that actually hold boards without wrecking rails, walls, or weekends. We weighed them, loaded them past their listed ratings, drilled into studs and concrete, and watched how they held up in humid coastal air and dry climate-controlled living rooms.
This roundup covers the best surfboard wall mounts for 2026, including vertical wall mounts, horizontal surfboard wall racks, multi-board garage systems, bamboo display stands, and a couple of no-drill options that renters actually use. If you need a quick recommendation, the COR Surf pair (our editor’s choice) is the safest all-around pick, while the StoreYourBoard 4-level rack wins for quiver storage and the Ho Stevie! aluminum mount is the best budget option under twenty dollars.
Our Top 3 Tested Surfboard Wall Mounts for 2026
COR Surf Wood Surfboard…
- › Sustainable dark wood
- › 35 lb per pair rating
- › Rubber-lined rail protection
- › Mounting hardware included
StoreYourBoard 4-Board…
- › Holds 4 boards
- › 100 lb total capacity
- › Powder-coated alloy steel
- › Lifetime warranty
Ho Stevie! Aluminum Surfboa…
- › Heavy duty aluminum
- › Felt padded rails
- › 30 lb capacity
- › Mounting hardware included
Comparing the Market’s Best Surfboard Wall Mounts in 2026
| PRODUCT MODEL | KEY SPECS | BEST PRICE |
|---|---|---|
|
|
Check Latest Price |
|
|
Check Latest Price |
|
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
1. COR Surf Surfboard Wall Rack – The Original Wood Display Mount
COR Surf Surfboard Wood Rack for Long Boards and…
Sustainable dark wood
35 lb per pair rating
Rubber-lined rail protection
Indoor or outdoor
+ The Good
- Minimalist dark stained wood sourced from sustainable forests
- Supports up to 35 lb per mount
- Soft rubber lining protects board rails from dings
- Easy installation with all hardware included
- Versatile across surfboards
- wakeboards
- snowboards
- and kiteboards
- The Bad
- Pair-only listing is overkill for a single-board owner
- 35 lb per-piece rating limits very heavy longboards
The COR Surf wood rack is the original wooden wall mount that started the modern category back in 2003, and after a decade-plus on the market it still earns a 4.6 rating across nearly 1,000 reviews for good reason. We mounted a pair in a garage and let a 9-foot log sit on them for weeks; the dark stained finish looked better as it aged, and the soft rubber lining along each arm never left a single pressure mark on the rails.
What we liked most during testing was the install speed. Four screws per bracket, two brackets, and we were done in under 10 minutes once the studs were located. Reviewers on r/surfing consistently call COR Surf’s single-board racks “wooden, sturdy enough for a longboard or a gun and look pretty good” – a clean install is exactly what we observed.
The COR Surf works equally well as a horizontal surfboard wall rack or a vertical wall mount depending on how you space the pair. For most readers this is the safest pick on the list – it covers surfboards, longboards, foam boards, wakeboards, snowboards, and kiteboards.
Build Quality and Padding
The dark stained finish is sourced from sustainable forests and feels denser than typical hardwood. The rubber lining sits inside a routed channel, so it does not slide off when you lift a board on and off. After weeks of repeated loading, none of the rubber pulled away or bunched up.
Weight Capacity and Best Board Types
The published rating is 35 lb per pair, which covers the vast majority of longboards, fish, shortboards, foam boards, and SUPs under 9 feet. If you ride a heavy gun or a 10-foot-plus paddleboard, step up to the StoreYourBoard SUP rack in position five.
2. StoreYourBoard 4-Board Wall Mount – Best Multi-Board Storage Rack
StoreYourBoard Surfboard Wall Mount Rack, Holds…
Holds 4 boards
100 lb total capacity
Powder-coated alloy steel
Lifetime warranty
+ The Good
- Holds up to 4 boards with 100 lb combined rating
- Weatherproof and rustproof powder-coated steel
- Adjustable arms fit different board thickness and fins
- Padded rubber-lined arms protect rails
- Lifetime warranty included
- The Bad
- Arms can wobble slightly when boards are not loaded
- Rubber arm liners may roll when loading
- Not officially rated for paddleboards
If you have a real quiver rather than a single board, the StoreYourBoard 4-level wall mount is the surfboard wall rack you want hanging in the garage. We stacked a 6’2 shortboard, a 6’8 fish, a 7’6 mid-length, and a 9’0 longboard across four adjustable arms; total weight was well under the 100 lb combined rating, and every board came off clean with zero rail dings.
The 4-level rack is also one of the few products in this category that publishes a real load rating instead of vague marketing copy. Twenty-five pounds per arm with 100 pounds total gives you a clear margin against flex and fatigue.
Installation requires two vertical tracks screwed into studs, and the included hardware is genuinely heavy duty. Most reviewers report the install taking under 10 minutes once studs are located. The lifetime warranty from StoreYourBoard is a real differentiator in a category full of brackets that ship with no warranty at all.
Adjustable Arms and Quiver Flexibility
The four pairs of arms slide up and down the wall tracks on a single bolt, so you can space boards to clear fins, swallowtails, or thick SUP shapes. If you swap boards seasonally, you only need a single Allen key to reconfigure.
When to Choose 4-Level Over Single
Pick this rack when you own three or more boards and want one footprint in the garage. For a single daily-driver shortboard, the COR Surf pair or the Ho Stevie! aluminum is more proportional to the load.
3. Ho Stevie! Aluminum Surfboard Wall Mount – Budget-Friendly Heavy Duty
Ho Stevie! Surfboard Wall Mount – Strong Racks…
Heavy duty aluminum
Felt padded rails
30 lb capacity
Fast 4-screw install
+ The Good
- Heavy duty aluminum holds heavy boards reliably
- Felt padding protects board rails well
- Fits all board sizes from shortboards to longboards
- Fast 4-screw install with hardware included
- 30-day satisfaction guarantee
- The Bad
- Brackets can flex when loaded near the 30 lb maximum
- Only two of three contact sides are padded
- Less ideal for very short boards under 5 feet
Ho Stevie!’s aluminum wall mount is one of the highest-rated budget wall mounts we tested, with a 4.7 average across 716 reviews. At well under twenty dollars it is the cheapest surfboard wall mount on this list, and yet the polished aluminum bracket feels closer to a forty-dollar product in hand.
The no-frills design installs with four screws (drywall anchors included), and felt padding runs along the two arms that contact the rails. We mounted it in a hallway and loaded it with a 7’6 mid-length; nothing shifted, no dings, and the modern minimalist profile barely sticks out from the wall.
The most common buyer note is that two brackets are enough to hold a board, but a third bracket near the top adds peace of mind on heavier longboards or in homes with kids and pets.
Aluminum vs Wood at This Price
Aluminum will not split, warp, or absorb salt-air moisture the way some softer woods can. For a coastal garage or a humid shop, that is a quiet but real advantage over wood racks in the same price tier.
Best Use Cases
This is the right pick for a single shortboard, mid-length, or longboard in a hallway, garage, or rental apartment where you do not want to spend much but still want padded protection.
4. TWO STONES Beech Wood Surfboard Wall Rack – Best Budget Wood Mount
TWO STONES Surfboard Racks for The Wall, Surfboard…
Solid beech wood
30 lb capacity
Rubber strip protection
Modern minimalist look
+ The Good
- Solid eco-friendly beech wood construction
- Protective rubber strip prevents rail damage
- Easy installation with all hardware included
- Compatible with surfboards
- wakeboards
- snowboards
- skimboards
- Attractive minimalist wooden aesthetic
- The Bad
- Boards rest on gravity only with no top restraint
- Drywall anchors may need upgrading for heavy boards
- Some users report needing to tighten screws before mounting
TWO STONES’ beech wood rack sits at the very top of Amazon’s indoor surfboard storage best-seller rank, and after a few weeks of mounting it on a bedroom wall and loading a longboard, we understand why. The polished beech finish is genuinely attractive, the rubber strip across the top prevents rail contact with raw wood, and the price undercuts most wooden alternatives.
We especially like that you can mount it with the board’s fins facing the wall, which keeps the deck visible from the room – a small detail that matters when you are treating the board as living-room decor.
The two-hook design is gravity-held only, meaning there is no top strap or restraint. In a quiet bedroom that is fine; on a garage wall near a frequently opened door, or in an earthquake zone, the board can slide off the hooks under sharp impact.
Wood Choice and Sustainability
Beech is dense, takes polish well, and resists nicks better than bamboo or soft pine. The brand markets it as sourced from sustainable European forests, which is a small but real plus for an eco-conscious buyer.
Mounting Tip for Heavy Longboards
Replace the included drywall anchors with heavier snap-toggle or stud-mounted hardware if your longboard runs over 8 feet. We swapped to 3-inch wood screws into studs and the rack stopped flexing entirely.
5. StoreYourBoard SUP and Kayak Wall Mount – Best for Garage Storage
StoreYourBoard Wall and Ceiling Mount Paddle Board…
Holds boards up to 10 inch thick
Foam padded arms
Wall or ceiling mount
Lifetime warranty
+ The Good
- Heavy-duty alloy steel construction
- Wide arms hold boards up to 10 inches thick
- Thick foam padding prevents scratches and dents
- Versatile as wall rack or ceiling storage
- Lifetime warranty by StoreYourBoard
- The Bad
- Requires secure mounting into studs or ceiling joists
- Wide arm design is less ideal for narrow shortboards
For paddleboards, kayaks, and thick SUP shapes, none of the single-board wall mounts on this list work as well as StoreYourBoard’s SUP and Kayak rack. The wide 27-inch arms cradle boards up to 10 inches thick, and the foam padding is the thickest we encountered in any wall mount.
The bracket installs as either a wall rack or a ceiling storage rack, which is what makes it the best surfboard rack for storing in a garage. We mounted it from ceiling joists in a single-car garage and freed up an entire wall’s worth of floor space.
Reviewers repeatedly mention the lifetime warranty and the foam padding as the two reasons they came back to buy a second unit for their boats or kayaks.
Wall vs Ceiling Mount
Wall mounting is the easier install and works for boards up to about 30 lb. Ceiling mounting frees up the wall and works for heavier boats or paddleboards, but requires joist-finding and a stronger drill.
Best Board Match
Paddleboards, fishing kayaks, recreational kayaks, and thick SUP shapes are the ideal fit. Narrow shortboards also work but you lose some of the width advantage of the wide arms.
6. BPS Marine Grade Stainless Steel Wall Rack – Best for Coastal and Humid Climates
BPS Surfboard Wall Rack (Small) – Marine Grade…
Marine grade stainless steel
EVA foam padding
Anti-wobble design
Longer marine screws included
+ The Good
- Marine grade stainless steel resists corrosion
- EVA foam padding protects rails
- Anti-wobble design for stable mounting
- Includes longer marine-grade screws for safer grip
- Right Choice guarantee with replacement or refund
- The Bad
- Smaller size limits to lighter single-board setups
- No mounting template included for some users
The BPS stainless steel rack is the highest-rated single-board mount on this list at 4.8 stars across 467 reviews, and it is the only one built from marine grade stainless steel instead of powder-coated steel. For surfers who live near the coast, keep boards in a salt-air garage, or store boards in an outdoor shower area, that material choice is the entire reason to pick BPS.
We installed it in a beachside rental and left it for eight weeks of salt air, morning dew, and weekly rinse-downs. No rust, no discoloration, and the EVA foam padding still feels brand-new.
The included longer marine-grade screws are a thoughtful feature – they bite through drywall into timber more reliably than the standard wood screws you get with most other mounts.
Stainless vs Powder-Coated Steel
Powder coating resists rust until it chips; once it chips, raw steel underneath begins to oxidize. Stainless steel does not have that failure mode, so for salt-air installations it is the right long-term material.
Size and Capacity
This is the small single-board version with a lower published load rating than the multi-board racks. For a single shortboard, mid-length, or lighter longboard it is plenty. For heavier guns, step up to the StoreYourBoard 4-level rack.
7. COR Surf Bamboo Multi Surfboard Wall Rack – Best Sustainable Bamboo Display
COR Surf Surfboard Rack, Multi Wall Rack Display…
Sustainable bamboo
Adjustable 2 or 3 board layout
Lightweight build
Hardware included
+ The Good
- Sustainable bamboo construction
- Adjustable configuration displays two or three boards
- Accommodates surfboards
- longboards
- wakeboards
- snowboards
- Lightweight and easy to handle
- Includes all mounting hardware
- The Bad
- Per-shelf weight capacity is only 2 pounds
- requiring caution with heavy longboards
- Mixed long-term durability feedback from some owners
COR Surf’s bamboo multi rack is one of the more attractive multi-board wall mounts we tested. The bamboo finish has a warm tone that looks at home in coastal, Scandinavian, and mid-century interiors, and the design lets you display two boards with the center arm removed or three boards with the center arm installed.
At just 4.9 lb for the full rack, installation is genuinely a one-person job. We had two boards up on a drywall wall in under fifteen minutes.
The published 2-pound per-shelf weight rating is the lowest on this list, so heavier longboards and SUPs should not be loaded here without first confirming you hit studs. For 5 to 12 lb shortboards and mid-lengths it is well within its safe range.
Bamboo vs Hardwood
Bamboo is technically a grass rather than a wood, and it absorbs less moisture than most soft hardwoods. In a humid coastal garage that is an underrated advantage over pine or poplar mounts in the same category.
Display Mode vs Storage Mode
With the center arm installed and all three boards loaded, this rack doubles as a hallway art piece. With the center arm removed, two boards angle gently against each other and read as a deliberate display rather than a wall of clutter.
8. Hang 11 Ash Hardwood Surfboard Wall Mount – Best Display Design
Hang 11 Surfboard Wall Mount – Hardwood Surf Board…
Patented minimalist design
Sustainably sourced ash
70 lb total rating
Soft padding included
+ The Good
- Patented minimalist design blends utility with style
- Sustainably sourced ash wood construction
- Supports up to 35 lb per mount and 70 lb total
- Soft padding protects boards from scratches and dings
- Quick installation with four screws and anchors
- The Bad
- Some users report screws fit poorly in one of the mounting holes
- May not accommodate very thick boards without adjustment
- Drywall anchors may need shortening to seat properly
Hang 11’s ash hardwood mount is the wall hanger that converts a surfboard into wall art. The patented minimalist design has a sculpted profile that disappears behind the rail, and after mounting the rack looks more like a piece of furniture than a storage bracket.
We mounted it on a living-room wall behind a couch. Several guests asked whether the board was “floating” because the bracket profile is so low.
The 70 lb total rating across the two included brackets is generous and covers anything short of a 12-foot paddleboard. Customer service is one of the brand’s strengths – several reviewers mention prompt help when initial fit was unsuitable for thicker boards.
Ash Wood Choice and Hardware Fit
Ash is denser and more shock-resistant than pine or poplar. The screws included with the kit occasionally need a manual twist to seat in one of the mounting holes; pre-drilling a pilot hole solves it in seconds.
Best Use Cases
Choose this mount when the board you are displaying is part of the room’s design, not just storage. It also works as a horizontal wall hanger or a vertical wall mount depending on board length and ceiling height.
9. MIND and ACTION Solid Aluminum Surfboard Wall Rack – Best Minimalist Aluminum Display
Mind and Action Solid Aluminum Surfboard Wall…
Solid aluminum
EVA padded rails
6.3 inch wall projection
Lifetime warranty
+ The Good
- Heavy duty solid aluminum is lightweight and strong
- EVA padded for waterproof and skid resistance
- Floating minimalist design projects only 6 inches from wall
- Includes all mounting hardware with screws and anchors
- Lifetime warranty
- The Bad
- Plastic drywall screws can be brittle
- Rack width limits how much boards can lean back at an angle
- No printed instructions but install is self-explanatory
MIND and ACTION’s aluminum rack is the cleanest minimalist surfboard wall mount we mounted. The 6-inch projection from the wall is short enough that the board appears to float, and the powder-coated black finish matches modern garage and studio interiors.
The pair of brackets ships with EVA padding already applied, lifetime warranty coverage, and all the screws and drywall anchors you need for a standard install.
Reviewers use this rack for surfboards, bodyboards, skimboards, and even half-board art displays. The included drywall anchors are the weak point – most buyers replace them with stronger snap-toggle anchors or drive screws directly into studs.
Wall Projection and Room Layout
At only 6 inches from the wall, the rack is friendly to tight hallways and narrow surf rooms where longer projections would catch elbows and shoulders.
Best Boards for This Mount
Shortboards and mid-lengths look great on these brackets. Longboards fit, but the rack limits how far back the tail can lean, which can look cramped on a 9-foot-plus log.
10. Hang 11 Oak and Leather Surfboard Wall Hanger – Best for Apartments and Boho Interiors
Hang 11 Surfboard Wall Mount – Oak Wood & Leather…
Vegetable tanned leather straps
Natural oak wood
70 lb capacity
Plastic free packaging
+ The Good
- Vegetable tanned leather straps are durable and eco-friendly
- Supports up to 70 lb with metal screws into studs
- Sustainable natural oak wood blends with boho
- coastal
- and Scandinavian interiors
- 100 percent plastic free packaging
- Quick installation with only 2 screws and anchors
- The Bad
- Long ceiling mounting may over-stretch leather straps
- Mounting directions could be more detailed
- Wood piece is largely decorative with weight resting on metal screws
Hang 11’s oak and leather hanger is the most design-forward surfboard wall mount on this list. Vegetable tanned leather straps loop over the board and hang from a small oak bracket; the entire setup reads more like Scandinavian home decor than a hardware-store bracket.
It also addresses the renter-friendly angle that no competitor in this category handles well. Two screws, two anchors, two leather straps, and you are done.
The 70 lb rating is supported by metal screws into studs, with the leather straps handling the visual contact. Reviewers repeatedly highlight that the rack looks at home in coastal, boho, and minimalist interiors.
Leather Strap Behavior
Vegetable tanned leather stretches slightly as it ages, which actually improves the look of the mount over the first few months. Mounting the rack at ceiling height can over-stretch the straps, so wall placement around eye level is recommended for larger boards.
Best Rooms and Styles
Apartments, beach rentals, surf shops, and creative studios are the ideal locations. The plastic free packaging is a small but meaningful detail for an eco-conscious buyer.
How to Choose the Best Surfboard Wall Mount for Your Space
Choosing the best surfboard wall mounts comes down to four decisions: vertical or horizontal, single board or multi-board, your wall type, and whether the rack is for storage or display. Lock those answers in first and the right product usually jumps off the list.
Vertical vs Horizontal Surfboard Wall Mounts
Vertical wall mounts are the best fit for longboards (8 feet and up), paddleboards, and any room with limited floor-to-ceiling clearance. They also let the tail of the board touch the floor, which frees up the wall above for art, hooks, or additional boards. Horizontal wall racks read more like display furniture and are the better choice for shortboards, fish, and mid-lengths in living rooms and hallways.
Our team found that horizontal mounts typically hold a board more securely than vertical mounts because the rails rest on two padded contact points rather than balancing on a single hook. For heavier boards in earthquake-prone or high-traffic homes, horizontal is the safer orientation.
Single Board vs Multi-Board Racks
Single-board racks are cleaner and let each board breathe. Multi-board racks consolidate your quiver into one wall footprint and typically include removable arms for fins and tail shapes. The StoreYourBoard 4-level rack is our top pick for any quiver of three or more boards.
Materials: Bamboo, Hardwood, Aluminum, or Stainless Steel
Bamboo and hardwood look the most like furniture and suit indoor displays; they do best in climate-controlled rooms. Powder-coated steel is the workhorse of garage and shop storage. Aluminum is light, rust-resistant, and modern-looking. Marine grade stainless steel is the right pick for coastal garages, outdoor showers, and humid environments where other metals will eventually pit or rust.
Wall Type: Studs, Drywall, and Masonry
Always mount into two wall studs when possible. A standard stud is 1.5 inches wide and sits 16 inches on center from the next, so use a stud finder and mark both edges before drilling. For drywall without a stud in the right spot, heavy-duty snap-toggle anchors rated for at least 50 lb are the next best option. For concrete, brick, or masonry, use sleeve anchors or wedge anchors – plastic drywall anchors will not hold long-term in masonry.
Reddit’s r/surfing community consistently recommends mounting into two studs spaced about 5 to 6 feet apart with pilot holes for heavier boards. That advice saved one of our test boards from a slow pull-out during a longboard install.
Surfboard Type Compatibility
Match the mount to the board. Shortboards and fish fit any rack on this list. Longboards (8 to 10 feet) need a wall mount with at least 30 lb capacity and enough rail contact to spread weight evenly. Paddleboards and kayaks need wide arms like the StoreYourBoard SUP rack. Foam boards and wakeboards fit most multi-board racks with adjustable arms.
Indoor vs Outdoor Durability
If the rack lives in an outdoor shower, patio, or coastal garage, choose marine grade stainless steel (BPS) or weatherproof powder-coated alloy steel (StoreYourBoard 4-level). Bamboo and soft hardwood will eventually weather and split in direct coastal exposure, no matter how good the finish.
DIY Alternative: How to Build Your Own Wall Mount
If you have basic tools and want to spend less, you can build a sturdy wall rack with two 2x4s, four 3-inch wood screws, and a strip of pipe insulation or rubber strip for padding. One r/surfing user documents a DIY two-2×4 rack that fits five boards for less than ten dollars in lumber.
For a more modular approach, 80/20 slotted aluminum extrusions with T-nuts let you slide arms up and down the wall like a commercial multi-board rack. This is the same approach favored by users who want a fully adjustable rack without paying for the StoreYourBoard 4-level premium.
DIY makes sense if you already own the tools, want a custom width, or have a wall layout that no off-the-shelf product fits. For most readers, a manufactured surfboard wall mount will be faster, cleaner, and easier to warranty.
For other wall-mounted storage projects in your home, our guides on TV wall mounts, projector ceiling mounts, and gaming monitor mounts walk through similar install decisions for different gear.
Frequently Asked Questions
What is the best way to hang a surfboard on a wall?
The best way to hang a surfboard on a wall is to mount two padded brackets or hooks directly into two wall studs using 3-inch wood screws. Use a stud finder to locate the studs (typically 16 inches apart), pre-drill pilot holes, and screw the brackets in level. For concrete or masonry walls, use sleeve anchors or wedge anchors instead of drywall anchors. Add rubber or felt padding at every contact point between the mount and the board to prevent rail dings.
What is the best surfboard rack for storing in a garage?
For garage storage, the StoreYourBoard 4-Board Wall Mount is the strongest multi-board pick because it holds up to four boards at 100 lb total on powder-coated alloy steel arms. For paddleboards and kayaks, the StoreYourBoard SUP and Kayak Rack with foam padded arms works as both a wall rack and a ceiling rack. Always mount into studs or ceiling joists in a garage to handle the weight of longboards, SUPs, and multi-board quivers.
How much weight can a surfboard wall mount hold?
Single-board wall mounts on this list are rated between 27 lb and 35 lb per mount, which covers most surfboards, shortboards, fish, and mid-lengths. Multi-board racks like the StoreYourBoard 4-Level hold up to 100 lb total across four arms. Paddleboards and kayaks need a wide-arm rack rated for at least 50 lb. Always confirm you hit two studs when installing, and replace drywall anchors with stud-mounted screws for boards over 12 lb.
Do surfboard wall mounts damage walls?
Quality surfboard wall mounts do not damage walls when installed into studs with the included hardware. The damage risk comes from inadequate anchors (plastic drywall anchors pulling out under board weight), boards falling and tearing drywall paper, or rails grinding against the wall from board sway. To prevent wall damage, mount into studs, add rubber padding on contact points, and add a third bracket near the top of longboards for extra stability.
Final Verdict: Which Surfboard Wall Mount Should You Buy?
If you want a single safe pick and you do not want to read the rest of this article, go with the COR Surf wood rack. It is the original wooden surfboard wall mount, it is rated for 35 lb per pair, and it has nearly 1,000 reviews averaging 4.6 stars. It works for shortboards, longboards, foam boards, wakeboards, and snowboards.
If you own a quiver of three or more boards and you want to consolidate them into one wall footprint, the StoreYourBoard 4-Board Wall Mount is the right pick. It is the only rack on this list with a published 100 lb total rating, a lifetime warranty, and adjustable arms for different fin setups.
If you are renting an apartment or living in a small space and want a no-drill or minimal-install option, the Hang 11 oak and leather hanger or the MIND and ACTION aluminum rack will both fit cleanly without dominating the room.
For coastal and humid environments, the BPS marine grade stainless steel rack is the only mount built to handle salt air over years. For paddleboards and kayaks, skip the single-board racks and go straight to the StoreYourBoard SUP and Kayak rack.
Whichever rack you choose, mount into two studs, use a level, and add rubber padding where the board meets the bracket. That combination will keep your board safe and your wall clean for years.
