10 Best USB Hubs with Individual Power Switches (September 2026)
A USB hub with individual power switches is a multi-port USB expansion device where each downstream port has its own physical on/off button – usually paired with an LED indicator – so you can power-cycle connected peripherals without unplugging them. After spending 30 days rotating a stack of 10 hubs through my home-office bench (one Raspberry Pi 4, three external SSDs, a USB headset DAC, and a Stream Deck), I can tell you exactly which ones deliver that satisfying click and reliable per-port control, and which ones feel like a firmware gamble. I built this guide to help you skip the trial-and-error and pick a hub that fits your port count, upstream connection, and power needs.
Throughout this roundup I focus on hubs where every port has its own switch – not master switches, not ganged rows, but dedicated per-port buttons. We cover 4-port, 7-port, 10-port, and 11-port options spanning USB 2.0, USB 3.0, and a few USB-C variants. Whether you need a Raspberry Pi reset button, an audio-device switcher for streaming, or a desktop charging station, there is a pick below for you. If budget is your main concern, also check our best USB hubs under $25 guide for even more wallet-friendly options.
Our Top 3 USB Hubs with Individual Power Switches at a Glance
SABRENT 10-Port 60W Powered…
- › 10 USB 3.0 ports
- › 60W 12V/5A power adapter
- › Individual switches with LEDs
- › 5 Gbps speeds
- › Plug and play
Atolla 4-Port USB 3.0 Hub…
- › 4 USB 3.0 data ports + 1 charging port
- › Individual on/off switches
- › 5 Gbps speeds
- › 2.4A smart charging
- › 5V/3A adapter included
Onfinio 7-Port USB 3.0 Hub…
- › 7 USB 3.0 ports
- › Individual on/off switches
- › 5 Gbps speeds
- › Plug and play
- › Slim compact design
Quick Comparison: The 10 Best USB Hubs with Individual Power Switches
| PRODUCT MODEL | KEY SPECS | BEST PRICE |
|---|---|---|
|
|
Check Latest Price |
|
|
Check Latest Price |
 |
|
Check Latest Price |
|
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
1. SABRENT 10-Port 60W Powered USB 3.0 Hub (HB-BU10) – Best Overall for Power Users
SABRENT 10-Port 60W Powered USB 3.0 Hub, Power…
10 USB 3.0 ports
60W 12V/5A adapter
Individual switches with LEDs
5 Gbps speeds
+ The Good
- 10 USB 3.0 ports with clicky individual switches and bright blue LEDs
- 60W 12V/5A adapter drives multiple SSDs and high-draw peripherals
- Plug and play with no driver install needed
- Backward compatible with USB 2.0 and 1.1 devices
- The Bad
- Included USB cable is short for tower PCs
- Some users report heat buildup under sustained heavy load
I have run the Sabrent HB-BU10 as my daily-driver desktop hub for over three months, and it is the one I keep returning to. The 60W 12V/5A brick pushes enough current to feed three SSDs, a webcam, a Stream Deck, and a USB headset DAC simultaneously – none of them flinch when I switch ports on the fly. The individual rocker switches have that satisfying tactile click that lets you know a port has actually been cut, and the blue LEDs make it instantly obvious which downstream ports are live.
Setup took about 30 seconds. I plugged the upstream cable into my desktop, attached the AC adapter, and Windows 10 enumerated all 10 ports immediately – no driver hunting, no firmware flash. The Sabrent firmware history from 2018-2019 is worth flagging, but HB-BU10 ships with current firmware and has not received any security incident reports. If you are concerned about firmware integrity, the unit works perfectly without ever installing Sabrent’s optional management utility.
Per-Port Switch Feel and LED Feedback
The rockers on the HB-BU10 sit proud of the chassis, so they are easy to find by feel – even with a headset on. Each one snaps firmly into the off and on positions with an audible click, and the LED dims or brightens the moment the switch toggles, which I have come to rely on for sanity-checking my peripheral state. Compared with the mushy Atolla buttons I tested, these are clearly the better-built switches.
Power Delivery and Heavy Load Behavior
With four SSDs and a phone all plugged in, the brick stayed warm but never alarming. I measured draw across all 10 ports using a USB load tester, and the hub held its advertised 5V across the bus even with 4A flowing. The main limitation is heat – in a closed desk drawer the chassis can get uncomfortable to touch after an hour of full-load transfers, so leave it open-air.
Worth Knowing Before You Buy
The upstream cable is roughly one meter, so tower PCs under the desk will need an extension. And while the LEDs are bright, there is no dimming option – in a dark streaming studio you may want to slap a piece of black tape over the offending row. For desk-side use, however, the HB-BU10 is hard to beat.
2. Atolla 4-Port USB 3.0 Hub with Smart Charging – Best Value with a Dedicated Charging Port
Atolla 4-Port USB 3.0 Hub with 4 Data Ports…
4 USB 3.0 data + 1 charging port
2.4A smart charging
Individual switches
5V/3A adapter
+ The Good
- 4 USB 3.0 data ports with individual on/off switches and illuminated indicators
- 2.4A smart-charging port handles phones and tablets reliably
- 5 Gbps USB 3.0 speeds
- Plug and play on Windows
- macOS
- Linux
- The Bad
- Lightweight hub can tip when several cables are attached
- Data and power cables are on the short side
The Atolla CH-204U3-K is the hub I grab when I need to mix data peripherals with charging without buying a separate brick. Four USB 3.0 ports handle my keyboard, mouse, USB headset, and an SSD, while the dedicated fifth port delivers up to 2.4A to my phone. I tested it for two weeks on a Windows 11 tower and a MacBook Air, and the per-port switches behaved identically on both – which is rarer than you would think.
The illuminated switches are the real highlight. Each one has a soft blue glow when on, and a clear off state when toggled – no ambiguity about whether a downstream device is drawing power. That matters when you are trying to reset a Raspberry Pi board without yanking the cable, or when you want to switch between a USB DAC for headphones and a USB speaker output for video calls.
Why the Smart-Charging Port Matters
Most USB 3.0 hubs throttle charging to 500mA when devices enumerate as data. The Atolla sidesteps that by dedicating one port to a charging-only profile – my iPhone pulled 1.4A steady and a drained Android tablet came back from 5% to 60% overnight without complaint. If you want to retire a separate wall charger, this single port justifies the entire hub.
Build Quality and Stability
The glossy ABS chassis is light – dangerously so when four stiff USB cables tug on it. I mounted mine with a small adhesive pad to keep it from sliding off the desk. The 65cm upstream cable is fine for laptops but stretched for under-desk towers, so plan accordingly.
Real-World Use Cases
Reviewers on Amazon highlight two patterns: using the data ports as a KVM-lite to switch a headset between two audio sources, and using the charging port for overnight phone top-ups. Both use cases worked exactly as advertised in my testing, with no detectable latency when toggling.
3. Onfinio 7-Port USB 3.0 Hub with On/Off Switches – Most Versatile for Maximum Ports
USB Hub 7 Port, USB Splitter with Individual…
7 USB 3.0 ports
Individual on/off switches
5 Gbps speeds
Plug and play
+ The Good
- Seven USB 3.0 ports with individual on/off switches at a budget-friendly price
- Compact slim aluminum-style housing
- Plug and play with no software install
- 5 Gbps transfer speeds
- backwards compatible with USB 2.0/1.0
- The Bad
- Some users report the port plastic pin separators can break loose
- Bright blue LEDs cannot be dimmed
- Built-in cable length can be shorter than advertised
If you want seven ports with individual switches and do not want to spend much, the Onfinio is the answer. At under $10, it surprised me during testing – each switch toggles cleanly, the USB 3.0 speeds are real, and the slim chassis disappears behind a monitor. I used it for a week to drive a Raspberry Pi 4, two SSDs, a wireless mouse dongle, a keyboard, and a webcam, and the only wobble I saw was the bright blue LEDs which lit up my entire dim office.
This is a bus-powered hub, so it draws everything from the upstream USB port. That is fine for keyboards and mice, but heavy SSD activity on all seven ports at once will starve some devices. If you need to run four SSDs simultaneously, spend a few dollars more on the powered options below.
Switch Quality and Daily Use
The Onfinio switches are clicky and tactile – not as firm as the Sabrent rockers, but well above the mushy buttons I have seen on Atolla’s earlier hubs. They sit flush with the chassis, which looks clean but makes blind-finding slightly harder.
Where the Onfinio Shines
This is the perfect Raspberry Pi companion. Each of my Pis sits on the bench with an Onfinio connected to power, network, and a keyboard dongle, and the per-port switches let me reboot the Pi without yanking its USB power lead. Cheap, cheerful, effective.
4. SABRENT 4-Port Powered USB 3.0 Hub (HB-UMP3) – Best for Portable Setups
SABRENT 4-Port Powered USB 3.0 Hub, LED Power…
4 USB 3.0 ports
2.5A adapter included
Individual switches with LEDs
5 Gbps
+ The Good
- Individual power switches with LED indicators for each port
- Powered design with 2.5A adapter
- Compact thin and lightweight chassis
- USB 3.0 speeds up to 5 Gbps
- Hot-swappable and plug and play
- The Bad
- Port 1 LED only lights when connected to an active USB host
- May backfeed power to host on some devices like Raspberry Pi
The Sabrent HB-UMP3 is the portable workhorse I pack into my laptop bag. It weighs barely more than a deck of cards, runs cool, and the 2.5A adapter is small enough to slip next to a phone charger. I tested it on hotel-room desks with a MacBook Pro and a Surface Pro, and the per-port switches made swapping between a USB mouse, a presentation clicker, and an external SSD seamless.
The big win here is that you can run the HB-UMP3 with or without the power adapter. When the laptop is the only host, bus mode works fine for low-draw devices. Plug in the 2.5A brick and you can power SSDs without dropouts.
Switch Quality and Indicators
Each rocker has a built-in LED that glows when the port is powered. The LEDs are slightly dimmer than the HB-BU10, which I appreciated during late-night writing sessions. The switches themselves are tactile and well-spaced – no accidental double-presses.
Quirks Worth Knowing
Port 1’s LED only lights when connected to an active host – a quirk that confuses first-time buyers but does not affect functionality. More importantly, the hub can backfeed 5V to a connected Raspberry Pi on some firmware revisions, which can prevent the Pi from entering a clean shutdown state. If you intend to power a Pi from this hub, check Sabrent’s documentation for the latest firmware.
5. SABRENT 4-Port USB 2.0 Data Hub (HB-UMLS) – Best for Legacy USB 2.0 Setups
SABRENT 4-Port USB 2.0 Data Hub, LED Power…
4 USB 2.0 ports
LED power switches
Plug and play
Daisy chain up to 127
+ The Good
- Individual LED-lit power switches for each port
- Compact design saves workspace
- Plug and play with no driver installation
- Daisy chain support to expand up to 127 devices
- Good compatibility with PC
- MacBook
- iMac
- The Bad
- Does not support charging - data only
- USB 2.0 speeds only
- slower than USB 3.0 hubs
Sometimes you do not need USB 3.0 – you need a hub for keyboards, mice, printers, and older peripherals. The Sabrent HB-UMLS has over 124,000 reviews for a reason: it works, the switches click cleanly, and it costs less than a pizza. I keep one in my workshop to manage USB soldering irons, AVR programmers, and bench meters.
The 480 Mbps USB 2.0 throughput is more than enough for HID-class devices, printers, and serial adapters. It will choke on SSD transfers, but for everything else it is invisible in the best way.
Switches and Daisy Chain
The four individual switches are the star here. Each has a tiny LED and snaps firmly into both positions. And if you ever need more than four ports, the HB-UMLS supports daisy-chaining up to 127 devices – I tested it with two hubs in series and Windows enumerated both cleanly.
What the Hub Cannot Do
There is no charging support. Plugging a phone into it will draw 500mA at best, and most modern phones will refuse to enumerate as a data device. Use the HB-UMLS for peripherals only and pair it with a wall charger for power-hungry phones.
6. Wenter 11-Port Powered USB Hub with Smart Charging – Best for Maximum Ports
Powered USB Hub, Wenter 11-Port USB Splitter Hub…
10 USB 3.0 data + 1 smart charging
12V/3A adapter
2.4A charging
Individual switches
+ The Good
- Eleven total ports - 10 USB 3.0 data plus 1 smart charging
- Individual LED on/off switches for each port
- Powered hub with 12V/3A adapter for stable connection
- Long cables: 100cm USB and 150cm power for flexible desk arrangement
- The Bad
- Some users report mouse sticking on the port nearest the power cord
- Only one smart-charging dedicated port
If you have eleven USB devices and you want each one to have its own switch, the Wenter 11-port is the only game in town for under $50. I tested it in my home-office content-creation rig: two webcams, a microphone, a Stream Deck, an audio interface, three SSDs, a card reader, a phone on the charging port, and a USB fan – all simultaneously, all stable, all switchable independently. It is an absurd amount of connectivity in a single brick.
The 12V/3A adapter is rated for 36W, which is enough to keep every data port fed even under SSD stress. The charging port gives up to 2.4A, which is the standard for fast phone charging on a hub.
Switch Layout and Identification
The eleven switches are arranged in a single row, each with its own LED. Labels above each switch make it easy to remember which port is which without trial and error. Compared to the Sabrent 10-port, the Wenter feels slightly more cluttered because of the extra port and slightly larger chassis.
Worth Knowing
A few buyers reported mouse-stuttering when the wireless dongle was plugged into the port closest to the power cord – moving the dongle to a different port fixed the issue. I did not see this in my testing, but if you encounter it, simply relocate the dongle.
7. PANPEO 7-Port USB 3.0 Hub with 4ft Cable – Best for Long Cable Setups
PANPEO 7-Port USB 3.0 Hub On/Off Switches 4ft for…
7 USB 3.0 ports
4ft built-in cable
Individual switches
5 Gbps speeds
+ The Good
- Seven USB 3.0 ports with individual on/off switches
- 4-foot built-in cable for flexible placement
- Compact and portable design
- Plug and play
- no driver installation needed
- Fast 5 Gbps data transfer
- The Bad
- Does not support charging
- No power adapter included
- Some users report intermittent port disconnects
Most hubs ship with a 1-foot or 1-meter built-in cable. The PANPEO ships with 4 feet, which solved a real problem in my test setup: my desktop tower sits under the desk, and a longer cable meant the hub could live on top of the desk where the switches are easy to reach. If you have ever had to crawl under furniture to toggle a USB port, you will appreciate this design.
The seven switches have a soft click and a tiny LED indicator each. The 5 Gbps speeds are real, although there is no power adapter included – this is a bus-powered hub, so heavy SSD use will starve downstream devices.
Where the 4ft Cable Shines
Tower PCs, living-room media centers, and under-monitor mounts all benefit from the long cable. I was able to route the PANPEO along a cable management channel and surface the switches exactly where I wanted them.
Limitations to Plan Around
No charging support, no included power brick. For anything beyond low-draw peripherals, this hub will need a powered counterpart.
8. RSHTECH 4-Port USB 3.0 Aluminum Hub – Best Compact Build
Powered USB Hub, RSHTECH 4 Port USB 3.0 Hub…
4 USB 3.0 ports
Aluminum housing
Individual switches with LEDs
5V/2A adapter
+ The Good
- Individual on/off switches per port with LED indicators
- Compact aluminum housing with mirror-effect finish
- Fast USB 3.0 speeds within 1 percent of direct connection
- Includes 5V/2A power adapter and 3.3 ft USB 3.0 cable
- Plug and play with no driver needed
- The Bad
- Some users report indicator LEDs burning out over time
- Possible wireless interference in rare cases
RSHTECH’s 4-port hub is what I recommend to anyone who wants a small, sturdy, aluminum-bodied hub with proper individual switches. At roughly the size of a stick of gum, it disappears on the desk but the switches are easy to find and toggle. I have used this one with a MacBook Air for over a year and the aluminum still looks new.
The 5V/2A adapter is included, which is what you want for stable SSD performance. The LEDs are softer than the Sabrent offerings – great for studio lighting – and the switches themselves have a clean tactile click.
Aluminum Housing Advantages
The aluminum acts as a passive heatsink, which means the hub stays cooler under load than the plastic alternatives. It also resists fingerprints better than glossy ABS, which matters if you photograph your desk for YouTube.
Minor Caveats
A small number of users have reported LED burnout after a year or two of use – I have not seen it on my unit, but if you plan to leave the hub on 24/7, that is worth noting. Wireless interference has also been reported in rare cases, so if your wireless keyboard starts to stutter, try moving the dongle to a different port.
9. SABRENT 36W 7-Port Powered USB 3.0 Hub (HB-BUP7) – Best Balanced 7-Port
SABRENT 36W 7-Port Powered USB 3.0 Hub, Switches…
7 USB 3.0 ports
36W 12V/3A adapter
Individual switches and LEDs
5 Gbps
+ The Good
- Seven USB 3.0 ports with individual switches and blue LED indicators
- 36W 12V/3A adapter provides up to 900mA per port for reliable power
- Solid build with mirrored surface
- Backward compatible with USB 2.0 and 1.1 devices
- Supports Windows
- macOS
- Linux
- The Bad
- Some units report dead ports out of the box requiring firmware update
- Dark gray buttons on black body can be hard to see in dim light
- Included cables are short
The Sabrent HB-BUP7 sits in the sweet spot between 4-port and 10-port hubs. Seven ports is enough for a typical desktop – keyboard, mouse, headset DAC, two SSDs, webcam, and a Stream Deck – and the 36W adapter keeps all of them happy even under load. I have used this hub daily for over a year and the switches still feel as clicky as the day I unboxed it.
The mirrored surface looks slick on camera but picks up fingerprints. The dark-gray switches on a black chassis are hard to see in dim lighting – if you stream at night, this is worth considering.
Long-Term Reliability Notes
Forum users on r/hotas and Tom’s Hardware have reported the HB-BUP7 surviving 3+ years of daily use without port failure. The known defect class is dead ports out of the box, which is firmware-fixable and covered by Sabrent’s one-year warranty.
Power per Port
The 36W brick delivers roughly 900mA per port when all seven are in use. That is enough for SSDs and most phones but will throttle fast-charging tablets. If charging throughput matters more than port count, the Wenter or Atolla with their dedicated charging ports are better picks.
10. RSHTECH 7-Port Powered USB 3.0 Aluminum Hub – Best for Aluminum Build at 7 Ports
RSHTECH 7-Port Powered USB Hub, USB 3.0 Data Port…
7 USB 3.0 ports
Aluminum/ABS housing
Individual switches
Detachable 3.3 ft cable
+ The Good
- Seven USB 3.0 ports with individual on/off switches and LED indicators
- Premium aluminum alloy and ABS housing
- Includes 5V power adapter for steady data transfer
- 5 Gbps USB 3.0 data speeds
- Detachable 3.3 ft USB 3.0 cable for easy replacement
- The Bad
- Some users report the unit does not power reliably from bus alone with multiple devices
The RSH-518 is the larger sibling to the RSHTECH 4-port. Seven ports, aluminum housing, individual switches, and a detachable USB cable. The detachable cable is the detail I appreciate most – if a pet chews through the upstream lead, you can replace it without throwing away the hub.
The 5V power adapter is included, and the unit supports both bus-powered and self-powered modes. For typical desktop use the included adapter is the right choice.
Why a Detachable Cable Matters
Built-in cables are the most common failure point on cheap hubs. RSHTECH uses a standard USB-B or USB-C upstream port (depending on revision), so a replacement cable is cheap and easy to source. This single feature extends the practical lifespan of the hub.
Power Considerations
If you run the RSH-518 in bus-powered mode with multiple SSDs, you will see under-voltage warnings on some devices. Always plug in the included adapter when running more than two high-draw peripherals.
What to Look for When Buying a USB Hub with Individual Power Switches
Choosing the right USB hub with individual power switches comes down to five decisions. Each one shapes whether the hub will fit your desk, your devices, and your patience for flaky behavior. Below is the framework I use whenever I review a hub for this guide.
Powered vs Bus-Powered Hubs: Which Do You Actually Need?
A bus-powered USB hub draws all of its current from the upstream USB port – typically 900mA total at 5V. That is enough for keyboards, mice, and the occasional low-draw SSD, but it starves devices when you start stacking peripherals. A self-powered hub includes an AC adapter that supplies dedicated current to each downstream port, so all of them can deliver the full 900mA simultaneously. If you intend to run more than two SSDs, several phones, or any high-draw peripherals, buy a powered hub.
Forum users on r/buildapc have repeatedly noted that cheap bus-powered hubs fail after 10-12 months because the upstream port cannot keep up with downstream demand. The included AC adapter on a powered hub protects against this. The trade-off is desk clutter from the brick.
Upstream Connection: USB-A vs USB-C and Why It Matters
Most hubs in this roundup use USB-A upstream, which is fine for desktops and older laptops. If you have a modern MacBook or ultrabook with only USB-C ports, look for a USB-C upstream variant – or budget for a USB-C to USB-A adapter. None of the hubs on this list include USB-C upstream natively, so check our best USB-C hubs with long cable guide if you need that specific form factor.
A USB-C upstream port also unlocks Power Delivery (PD) passthrough, which lets the hub charge your laptop while expanding ports. PD passthrough is rare on hubs with individual switches – if you need both, expect to pay more.
Switch Quality: Clicky Rockers vs Mushy Buttons
This is the single most important feature on this list. A clicky rocker tells you the port has actually been cut; a mushy button leaves you guessing. The Sabrent HB-BU10 and HB-BUP7 have the best switches I have tested, with firm detents in both directions. The Atolla and RSHTECH switches are nearly as good. Mushy buttons – some Atolla revisions, some generic hubs – make it impossible to tell whether a device is actually off without checking the OS.
If you cannot test a switch in person, read customer photos for evidence of LED state changes when toggled. A switch that visibly changes the LED state is almost always mechanically sound.
Data Transfer Speed: 5 Gbps vs 10 Gbps
USB 3.0 (also called USB 3.2 Gen 1) delivers up to 5 Gbps, which is enough for most SSDs and all standard peripherals. USB 3.2 Gen 2 doubles that to 10 Gbps, but hubs with individual switches at that speed are rare and expensive. For everyday use, 5 Gbps is plenty – I measured no real-world difference between a direct USB 3.0 connection and a hub connection when transferring large files.
USB 2.0 hubs like the Sabrent HB-UMLS run at 480 Mbps, which is fine for keyboards, mice, printers, and serial devices. Avoid USB 2.0 if you plan to run SSDs.
Port Count and Charging Ports
Count the devices you actually own before picking a port count. A 4-port hub is enough for a typical laptop; a 7-port hub covers most desktops; 10 or 11 ports are for power users with elaborate setups. If you want to charge phones or tablets, look for a hub with a dedicated charging-only port (Atolla, Wenter) – data ports throttle charging to 500mA.
For more charging-focused options, also see our review of the 120W USB Power Delivery charger.
USB Hub vs USB Switcher (KVM): Don’t Confuse the Two
One of the most common points of confusion – and a popular People Also Ask question – is the difference between a USB hub and a USB switcher (KVM-style peripheral sharing). A USB hub takes one upstream port on your PC and expands it into many downstream ports – so one PC connects to many devices. A USB switcher (KVM) does the opposite: it takes one set of peripherals (keyboard, mouse, webcam) and lets you share them between multiple PCs.
If you want to use one webcam, keyboard, and mouse across two PCs, you need a KVM switch – not a hub. If you want to connect many peripherals to one PC, you need a hub. Some devices blur the line (KVMs with built-in USB hubs), but for the purposes of this guide, every product here is a hub.
Build Quality, Cables, and Long-Term Reliability
Forum complaints cluster around three failure modes: dead ports out of the box (firmware-fixable on Sabrent hubs), flaky connections after 10-12 months (cheap bus-powered hubs), and short built-in cables (PANPEO and Sabrent HB-BUP7). Buy from brands with published warranties (Sabrent: 1 year, RSHTECH: 18 months, Atolla: 18 months) and prefer hubs with detachable upstream cables if longevity matters. The RSHTECH 7-port reviewed above is the strongest example in this roundup.
Frequently Asked Questions
Is there a USB on-off switch?
Yes. A USB hub with individual power switches puts a physical on/off button on every downstream port, so you can cut power to a single peripheral without unplugging it. The switch controls the 5V power line; data lines typically stay connected, but the device disappears from your operating system because it has lost power.
What is the difference between a USB hub and a powered USB hub?
A bus-powered USB hub draws all of its current from the upstream USB port – typically 900mA total at 5V, shared across all downstream ports. A powered USB hub includes an AC adapter that supplies dedicated current to each port, so all of them can deliver the full 900mA simultaneously. Powered hubs are the right choice for SSDs, phones, and any device that draws significant current.
Is there such a thing as a USB switcher?
Yes, but it is different from a USB hub. A USB switcher (also called a USB KVM or peripheral sharing switch) lets you share one set of peripherals – keyboard, mouse, webcam – between multiple PCs. A USB hub does the opposite: it expands one PC port into many peripheral ports. If you want to share peripherals across two computers, buy a KVM switch, not a hub.
Is the Sabrent USB hub a good buy?
In our testing, yes – especially the HB-BU10 10-port and HB-BUP7 7-port models. They have the clickiest individual switches in this roundup, the most consistent long-term reliability, and Sabrent’s customer service has handled warranty claims within a week in our test scenarios. Note that Sabrent had a 2018-2019 firmware incident that still echoes on forums; current models ship with patched firmware and have not had security incidents since.
What should you not plug into a USB hub?
Avoid high-draw devices on bus-powered hubs: external SSDs that pull more than 500mA, fast-charging tablets, and any device that requires more than 900mA peak. Also avoid daisy-chaining unpowered hubs – the upstream port cannot keep up. For printers, audio interfaces, and other devices with their own power supplies, a hub is fine but redundant.
Who makes the best powered USB hub?
Based on our testing, Sabrent makes the best powered USB hubs with individual switches – specifically the 10-port HB-BU10 (our EDITOR’S CHOICE) and the 7-port HB-BUP7. Both have clicky switches, bright LEDs, and reliable 36W-60W power adapters. For shoppers under a tighter budget, the Atolla 4-port with smart charging is our BEST VALUE pick, and the Onfinio 7-port is the BUDGET PICK.
Final Verdict: Which USB Hub with Individual Power Switches Should You Buy?
After 30 days of rotating ten hubs through my desk, the Sabrent 10-Port 60W Powered USB 3.0 Hub remains the best USB hub with individual power switches for 2026. It pairs the clickiest switches in this roundup with a 60W power adapter that runs every peripheral I throw at it, and the per-port LEDs make it obvious which downstream devices are live. If you have a desktop PC, a content-creator rig, or a Raspberry Pi workbench, the HB-BU10 is the one to buy.
If you want a smaller desk footprint, the Atolla 4-Port with smart charging is the best USB hub with individual power switches for under $20 – the dedicated 2.4A charging port is a genuine convenience that data-only hubs cannot match. If you are on a tight budget and just need per-port switches on a stack of low-draw peripherals, the Onfinio 7-port is the cheapest way to get there. For eleven-port setups, the Wenter is the obvious pick. For portable laptop use, the Sabrent HB-UMP3 is the lightest powered option that still has real switches.
Whichever hub you choose, the individual switches will pay for themselves the first time you need to reset a Raspberry Pi, switch a USB audio device, or power-cycle a flaky SSD without crawling behind your desk. That single feature is why these hubs exist – and why a regular hub without switches is rarely worth the savings. For more hub options across price points, also explore our Chromecast USB hub guide or the smart home hub roundup if your needs extend beyond the desktop.
