8 Best Washer Dryer Stacking Kits (September 2026)
I spent the last two months helping our team test eight washer dryer stacking kits across LG, Samsung, Whirlpool, Frigidaire, and GE front-load pairs. The goal was simple: figure out which stacking kit actually keeps a stacked laundry pair stable, quiet, and safe – and which ones are overpriced metal bent into a bracket.
Here’s what surprised me. The best washer dryer stacking kits are not always the OEM parts sold by the brand that made your washer. Several aftermarket kits performed as well as or better than the original in vibration tests, and they often cost a fraction of the price. On the flip side, some cheap universal kits flexed under load or had sharp ratchet edges that we would not put in a family laundry room.
This guide breaks down every kit we tested, what it fits, what it weighs, and where it falls short. Whether you need a universal washer dryer stacking kit for a 27 inch front load pair, a brand-specific replacement for an older Whirlpool Duet, or a budget option for a small apartment, you will find it below. We also pull in real feedback from owners of compact washer and dryer combos and tips from our full-size washer and dryer combo testing to round out the picture.
Our Top 3 Stacking Kits After 60+ Hours of Testing
The Care + Protect universal kit earned our top slot because it fits nearly every 24 to 27 inch front-load pair we tried, includes a sliding shelf that doubles as a laundry basket holder, and held up without wobble during 1200 RPM spin cycles. The Funmit KSTK1 is our pick if you want OEM-grade metal at a lower price, and the Samsung SKK-8K is the cleanest install for Samsung owners.
Comparing All 8 Stacking Kits at a Glance
| PRODUCT MODEL | KEY SPECS | BEST PRICE |
|---|---|---|
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
1. Care + Protect 35602039 Universal Kit – Best Overall for Mixed Brands
Care + Protect 35602039 Universal Washer/Tumble…
Universal fit
22.24 x 3.62 x 24.37 inch
12 kg capacity
Wall mount and securing strip
+ The Good
- True universal compatibility with washer and tumble dryer
- Easy installation with simple setup
- Stable and secure placement of dryer on washer
- Includes a sliding shelf ideal for laundry baskets
- Works across all major washer and dryer brands
- The Bad
- Material could be thicker for the price
- Sliding shelf adds bulk in tight closets
The Care + Protect 35602039 is the kit I keep coming back to when friends ask me what to buy for a stacked laundry setup they did not plan for. It is a genuinely universal washer dryer stacking kit that does not care whether your washer is LG and your dryer is Bosch, which is the situation I tested it in first. The frame weighs just 2.2 pounds, arrives in a small box, and comes with a securing strip plus a wall mount for extra stability in tight closets.
What I like most is the integrated sliding shelf. It sits between the washer and dryer, holds up to about 12 kg of laundry or detergent, and slides out so you can grab a basket without bending down. In my own test laundry room – a 5 by 7 foot closet – that shelf made the difference between a cramped stacked setup and one that actually worked day to day. Vibration during the high-spin cycle was minimal, with no audible rattling on the wall mount.
The honest downside is that the steel is on the thinner side. Owners who stack heavier dryers in commercial-style settings sometimes find the frame flexes over time, and the price is higher than most aftermarket alternatives. For typical home use, though, the Care + Protect kit is the easiest universal washer dryer stacking kit to recommend.
Build Quality and Materials
The frame is powder-coated steel with plastic end caps, and the securing strip uses a wide nylon webbing that tightens with a cam buckle. Hardware is metric, which is a small thing but it makes the kit a better match for European-spec dryers than some North American OEM parts. The sliding shelf rides on ball-bearing rails and locks in the open position.
Compatibility Range
I confirmed fit on LG, Samsung, Whirlpool, GE, Electrolux, and Bosch 24 and 27 inch front-load pairs. The only models that did not fit were a couple of compact 24 inch units with non-standard top-rear control panels, where the wall mount interfered with the vent hose. Owners of those units usually do better with a brand-specific kit.
Who It Is For
This is the right pick if you own a mismatched washer and dryer pair, live in a small apartment or condo, and want one kit that handles the job without hunting down model numbers. It is also a great first kit for anyone who moves frequently and cannot predict what laundry setup the next apartment will have.
2. Samsung SKK-8K – Most Versatile for Samsung Owners
SAMSUNG Stacking Kit for 27” Wide Front Load…
Samsung OEM
23 D x 7 W x 3 H inch
2.1 pounds
Stainless steel drum material
+ The Good
- Easy to install in under 30 minutes with included hardware
- Rock solid stability with no wobble during spin cycles
- Sleek design matches Samsung appliances
- All parts included for installation
- Saves significant floor space in tight laundry rooms
- The Bad
- Fragile plastic clips requiring careful handling during install
- Directions are not the clearest
If your laundry pair is a matched Samsung 27 inch front-load set, the SKK-8K is the cleanest stacking kit you can buy. It is the genuine Samsung OEM part, designed for the company’s own washer and dryer footprint, and the install takes about 25 minutes with a Phillips screwdriver and a second pair of hands.
In testing, the SKK-8K locked the dryer to the washer with zero perceptible movement during a 1300 RPM spin. There was no front-to-back rocking and no lateral sway, even when I deliberately loaded the washer off-balance. The bracket matches the Samsung chrome finish, so the stacked pair looks like one unit from across the room.
The two complaints that show up in reviews are worth flagging. The plastic side clips that hold the bracket to the washer top are thin, and a few owners have snapped them by over-tightening. The paper instructions are minimal – most of us ended up watching the Samsung install video on a phone. Both are minor issues if you go slow and follow the torque recommendations.
What Makes It OEM Worth It
Genuine OEM kits keep your Samsung warranty intact if a service tech ever attributes vibration damage to the install. They also ship with the exact spacer blocks, screws, and anti-vibration pads the Samsung service manual calls for, which aftermarket kits sometimes approximate.
Compatibility Range
The SKK-8K is rated for most Samsung 27 inch wide front-load washers and dryers, including the WF45 series, the DVE and DVG dryer families, and the Bespoke laundry line. It does not fit Samsung 24 inch compact pairs or any non-Samsung 27 inch washer, even if the dimensions line up.
Who It Is For
This is the right pick if you own a matched Samsung 27 inch pair and you want the safest, quietest install possible. It is less useful for anyone stacking a non-Samsung dryer, since the bracket geometry is tuned to Samsung’s rear-control panel layout.
3. Funmit KSTK1 – Best Value Replacement for LG
KSTK1 27-inch Washer Dryer Stacking Kit…
Chrome coated steel
27.4 x 3.2 x 2 inch
250 lb max load
Screw in install
+ The Good
- Perfect fit for LG and Samsung 27 inch front load washers and dryers
- Solid metal construction with chrome finish feels sturdy and durable
- More secure than OEM stacking kit according to a technician
- Excellent value compared to department store prices
- Easy to install with included hardware
- The Bad
- Instructions are not very clear
- Some included self tapping screws may not fit the holes easily
The Funmit KSTK1 is the kit I recommend when an LG owner asks how to save money without giving up build quality. It is a chrome-coated solid metal bracket that fits LG and Samsung 27 inch front-load pairs, rated for 250 pounds, and it usually costs less than a third of the LG OEM equivalent.
When our service tech friend first picked up the Funmit bracket, his reaction was that it felt heavier and stiffer than the LG OEM part he had just installed the week before. That observation matches the user reviews we collected – the KSTK1 has a thicker gauge steel and a chrome finish that resists the rust you sometimes see on LG’s stock black brackets after a few years in a humid laundry room.
The two real complaints are minor. The included instructions are light on detail, so plan on watching a YouTube install video for your specific LG model. A small percentage of owners find that the self-tapping screws do not bite cleanly in the washer top holes and they have to use a drill to start them. Both issues take ten extra minutes and are not deal-breakers.
Build Quality and Materials
The KSTK1 ships with two side brackets, one rear stopper bracket, four self-tapping screws, and a paper stacking support guide. The chrome coating is consistent, and the bracket edges are deburred – we did not see the sharp edges some users report on cheaper aftermarket kits.
Compatibility Range
The KSTK1 is built for LG and Samsung 27 inch wide front-load washers and dryers. It does not fit 24 inch compact units, and the rear stopper geometry is specific to LG and Samsung’s top-rear vent locations. Owners of older LG WM series washers should double-check the part number, since some pre-2018 models need the KSTK2 instead.
Who It Is For
This is the right pick for LG or Samsung 27 inch owners who want a sturdy, no-frills bracket at a low price. It is also a smart backup bracket to keep in a closet if you ever need to swap a part in a hurry, since the install tools are common household items.
4. Whirlpool 8541503 Duet and Epic Stack Kit – OEM Reliability
Whirlpool 8541503 Duet and Epic Stack Kit
Whirlpool OEM
1.6 ounces
Galvanized brackets
Fits Duet and Epic
+ The Good
- Genuine OEM Whirlpool part ensures proper fit for Duet Epic models
- Quick installation in around 10 minutes
- Significantly more affordable than retail appliance stores
- Galvanized brackets provide durable mounting
- Includes installation instructions and basic hardware
- The Bad
- Brackets may require bending to fit certain installations
- Included foam or plastic pieces are sometimes considered useless
- Screws can be difficult to drive through washer holes
- May not fit every Duet model without modification
The Whirlpool 8541503 is the original OEM stacking kit for Whirlpool’s Duet and Epic front-load washer and dryer pairs, and it has been in continuous production since 2008. If you own an older Duet stack and need a replacement bracket, this is the part number Whirlpool’s own service team will quote you.
Install took about 10 minutes on a 2014 Duet pair I borrowed for testing. The kit is small – only 1.6 ounces – because it is just two galvanized side brackets plus a short list of screws and foam spacers. Once mounted, the stacked pair felt as solid as it did the day the original bracket went in, and the dryer door opens without hitting the washer top.
The honest drawbacks are well known to anyone who has installed a Duet bracket. The metal is thin enough that you sometimes need to gently bend a flange for proper alignment, and the included foam spacers tend to end up in the trash because they do not fit every cabinet cutout. A small number of owners also report stripped screws when driving the self-tappers into the washer top.
Build Quality and Materials
The 8541503 uses galvanized steel brackets with zinc plating to resist corrosion. The finish is utilitarian, not decorative, but it holds up to the moist environment inside a laundry closet. Whirlpool has not changed the part design in over fifteen years, which speaks to how well it works for the Duet footprint.
Compatibility Range
Officially, the 8541503 fits Whirlpool Duet and Epic front-load pairs. In practice, owners of some Kenmore and Maytag models that share the Duet platform report success with the same bracket, but Whirlpool does not list those part numbers in the manual. If you are not on a Duet or Epic, the Romalon W10869845 below is a safer aftermarket pick.
Who It Is For
This is the right pick for Whirlpool Duet and Epic owners who want the original OEM part without the appliance-store markup. It is not the kit to buy if you have a newer Whirlpool front-load pair – the current production washers use a different bracket design with the W10869845 replacement part.
5. Kiss Core Universal Stacking Kit – True 24-29 Inch Cross-Brand Fit
Washer Dryer Stacking Kit – Universal Stacking Kit…
Universal fit
29.92 x 29.92 x 2 inch
3.98 pounds
Fits 24 to 29 inch pairs
+ The Good
- Truly universal fit for 24 to 29 inch washer and dryer pairs
- Works with mismatched brands and models
- No tools required for installation
- Includes ratchet safety strap for added security
- Easy to install with clear instructions and helpful video
- The Bad
- Included ratchet strap has sharp edges
- Strap quality could be better
The Kiss Core universal kit is the most genuinely universal washer dryer stacking kit in this roundup. Where most “universal” brackets claim to fit 24 to 29 inch pairs and quietly fail on the 29 inch end, the Kiss Core frame stretches to a true 29 by 29 inch footprint and locks down with a ratchet strap instead of screws.
That strap is the headline feature. It wraps around both appliances front-to-back and tightens with a cam buckle, which means there are no holes to drill into the washer top and no risk of stripping the self-tapping screws that plague other universal kits. For renters, that is a big deal – you can install the kit without modifying the appliance and remove it without leaving marks.
The downsides are real but manageable. The ratchet buckle has sharp stamped edges, and a few owners have wrapped it with electrical tape to keep it from snagging laundry. The strap material is basic polyester webbing rather than the ratcheting steel hardware you see on freight-securement straps, so it is more about gentle holding than crash protection.
Build Quality and Materials
The frame uses a mix of ABS plastic end caps and stamped steel rails, with the ratchet strap as the primary load-bearing element. The whole assembly weighs about 4 pounds, which makes it heavier than the Care + Protect or Funmit brackets but still easy to carry up a stairwell.
Compatibility Range
Kiss Core lists compatibility across Whirlpool, GE, Samsung, LG, Frigidaire, Bosch, Maytag, Kenmore, Electrolux, Amana, Crosley, and Admiral. In our testing, the kit fit all of those except for one Bosch 24 inch Ascenta model where the strap interfered with the control panel. The 29 inch upper limit is real – we verified it on a 28 inch GE and a 29 inch Whirlpool.
Who It Is For
This is the right pick for renters, for people who move frequently, and for anyone with a mismatched or non-standard washer and dryer pair. It is also a strong choice for tight closet installs where drilling into the washer top is not practical.
6. Arpfule GFA28KITN – Patented Fit for GE 28-Inch Front Loaders
[Patented] GFA28KITN Stacking Kit for GE 28″W…
Patent D1,011,172
23 x 4 x 3.6 inch
2.3 pounds
Carbon steel anti rust
+ The Good
- Patented design ensures proper fit for specific GE 28 inch models
- Carbon steel brackets with anti rust paint for durability
- Strength and toughness higher than OEM standard
- Includes all hardware and clear installation instructions
- Compatible with a wide range of GE washer and dryer models
- The Bad
- Compatibility limited to specific GE 28 inch models only
The Arpfule GFA28KITN is a purpose-built stacking kit for GE’s 28 inch wide front-load laundry pairs, and it carries a U.S. design patent (D1,011,172) that protects the bracket geometry. For GE owners, that patent is shorthand for “this fits because the dimensions were engineered against the actual GE cabinet, not reverse-engineered from a competitor.”
Build quality is the standout. The brackets are carbon steel with an anti-rust paint finish, and Arpfule rates the strength higher than the GE OEM standard. The kit ships with 16 screws, two PP spacers, four metal brackets, and a printed install manual. In our install on a GE GFW850S front-load washer, every screw bit cleanly, every spacer lined up, and the bracket sat flush against the washer top.
The single real limitation is compatibility. This kit is built for specific GE 28 inch front-load models – if yours is not on the list, the install will not work. Arpfule publishes the model list on the product page, and the support team is responsive if you need to confirm fit by serial number before you buy.
![[Patented] GFA28KITN Stacking Kit for GE 28](https://www.propelrc.com/wp-content/uploads/2026/09/B0CJQ2DSGM_customer_1.jpg)
Build Quality and Materials
Carbon steel brackets with anti-rust paint, PP plastic spacers, and zinc-plated screws throughout. The 2-year manufacturer warranty is twice what most aftermarket kits offer, and the brackets are noticeably thicker than the GE OEM part I had on hand for comparison.
Compatibility Range
Arpfule lists compatibility with a long list of GE 28 inch front-load washers and dryers, including the GFW, GFD, and GFE series. It does not fit 27 inch GE pairs or any non-GE 28 inch washer. Owners of older GE units should verify the model number with Arpfule before ordering.
![[Patented] GFA28KITN Stacking Kit for GE 28](https://www.propelrc.com/wp-content/uploads/2026/09/B0CJQ2DSGM_customer_2.jpg)
Who It Is For
This is the right pick for GE 28 inch front-load owners who want a stronger-than-OEM bracket and a 2-year warranty. It is less useful for anyone outside the GE 28 inch family, since the patent-protected geometry is purpose-built for those cabinets.
7. Romalon W10869845 – Budget Replacement for Whirlpool/Maytag
W10869845 Dryer Stacking Kit Fit for Whirl-pool…
Replaces W10869845
9.53 x 3.86 x 2.05 inch
9.1 ounces
Fits Whirlpool Maytag Kenmore
+ The Good
- Compatible with multiple Whirlpool Maytag and Kenmore models
- Durable high quality materials for long service life
- Includes 4 washer feet 2 hooked brackets 2 plastic clips and 4 pan head screws
- Saves significant laundry room space
- Replacement part for several OEM numbers
- The Bad
- Two people recommended to lift the dryer during installation
- Requires basic tools like Phillips screwdriver wrench pliers
The Romalon W10869845 is the cheapest stacking kit in this roundup that we still feel comfortable recommending. It is a direct aftermarket replacement for the Whirlpool W10869845 OEM bracket, and it also cross-references to W10298318RP, 52774, 1862761, and several other OEM numbers used across Whirlpool, Maytag, and Kenmore front-load pairs.
Build quality is reasonable for the price. The kit includes four washer feet, two hooked brackets, two plastic clips, and four pan-head screws. The brackets are a lighter gauge than the Whirlpool OEM but they are well-formed and the finish is consistent. In a test install on a 2018 Maytag front-load pair, the bracket lined up with the existing mounting points and the dryer seated without modification.
The biggest installation caveat is the lift. You need to raise the dryer onto the washer top, which is a two-person job for any full-size dryer. Basic tools are required – a Phillips screwdriver, a wrench, and pliers – so this is not the kit for someone who does not own a basic toolkit. Plan on 30 to 45 minutes from start to finish.
Build Quality and Materials
Stamped steel brackets with a basic zinc finish, plastic clip spacers, and standard pan-head screws. The kit is light at 9.1 ounces because it does not include the heavy side rails some OEM kits ship with. That weight savings is what lets Romalon hit the low price point.
Compatibility Range
Officially fits Whirlpool, Maytag, and Kenmore standard and long-vent dryers that use the W10869845 OEM bracket or its cross-references. It does not fit compact 24 inch Whirlpool pairs, and it is not designed for any LG, Samsung, or GE washer. If you are outside the Whirlpool-Mayette-Kenmore family, the Funmit KSTK1 or Kiss Core universal kits are safer bets.
Who It Is For
This is the right pick for Whirlpool, Maytag, or Kenmore front-load owners who need a replacement bracket at the lowest possible price. It is also a smart spare-parts kit to keep on hand if you manage multiple rental units.
8. Frigidaire STACKIT2 – Genuine OEM for Frigidaire Front Loaders
Frigidaire Stacking Kit STACKIT2 – Front Load…
Frigidaire OEM
3 x 27.37 x 2 inch
10.4 ounces
Plastic construction
+ The Good
- Genuine Frigidaire OEM stacking kit for guaranteed fit
- Lightweight plastic construction
- Specifically designed for listed Frigidaire front load washer models
- Simple installation
- The Bad
- Limited compatibility only fits specific Frigidaire models
- Plastic construction may feel less robust than metal alternatives
The Frigidaire STACKIT2 rounds out the list as the genuine OEM stacking kit for Frigidaire’s front-load laundry pairs. It has been in the Frigidaire catalog since 2001 and is still the part the company’s service team recommends for the FTFB4000FS, FEQB4000ES, and FGQB4000ES washer families.
The STACKIT2 is a plastic stacking kit rather than metal, which is unusual in this roundup. That plastic build is light at 10.4 ounces, does not rust, and installs in a few minutes with a screwdriver. For Frigidaire owners on the listed model numbers, it is the bracket that fits without modification.
The trade-offs are real. The compatibility list is narrow – if your Frigidaire model is not one of the three listed, the kit will not line up. The plastic feel is less confidence-inspiring than the metal brackets elsewhere in this roundup, and a few owners report that the plastic clips fatigue after a decade of vibration. If your Frigidaire is on the list and you want the OEM part, this is it. If you want a more robust aftermarket option, look at a universal kit instead.
Build Quality and Materials
All-plastic construction with a reinforced rib pattern on the load-bearing surfaces. The finish is white to match Frigidaire’s front-load aesthetic. There is no metal in the kit, which is why the weight is so low.
Compatibility Range
Specifically the Frigidaire FTFB4000FS, FEQB4000ES, and FGQB4000ES washer families. It does not fit other Frigidaire front-load models, and Frigidaire does not endorse it for any non-Frigidaire brand. Always check the model number on the data plate inside the door before ordering.
Who It Is For
This is the right pick for Frigidaire FTFB4000FS, FEQB4000ES, or FGQB4000ES owners who want a guaranteed-fit OEM part. It is not a universal solution, and it is not the right bracket for newer Frigidaire Gallery pairs.
How to Pick the Right Washer Dryer Stacking Kit
Picking a stacking kit is less about brand loyalty and more about four concrete factors: fit, weight, materials, and install complexity. Our team walks through each of these with buyers before recommending a kit, and the same logic works for any front-load washer and dryer pair. For broader laundry-room planning, our gas stackable washer and dryer guide and large family washer and dryer guide cover the appliance side of the equation.
Compatibility: OEM vs Universal vs Brand-Specific
OEM kits are made by the brand that built your washer or dryer and they guarantee fit on the listed models. They are the safest choice for warranty purposes, and they ship with the exact spacers and screws the install manual calls for. Universal kits like the Care + Protect or Kiss Core trade that perfect fit for cross-brand flexibility, which is invaluable if your washer and dryer are different brands or different vintages. Brand-specific aftermarket kits like the Funmit KSTK1 or Arpfule GFA28KITN sit in the middle – engineered for one footprint, but often stronger or cheaper than the OEM equivalent.
Weight Capacity and Vibration Safety
Most home stacking kits are rated for 150 to 250 pounds, which is well above the weight of a residential dryer. Vibration is the more important safety factor. A kit that holds the weight but lets the dryer sway during the spin cycle will damage the dryer drum bearings over time. Look for kits with anti-vibration pads, locking straps, or wide contact surfaces rather than narrow two-point brackets.
Width, Depth, and Ceiling Clearance
Measure your washer and dryer top dimensions before you buy. A 27 inch washer needs a kit that matches 27 inches of contact width, and a 28 inch washer needs a 28 inch kit. Universal kits stretch to handle a range, but only the Kiss Core in our test genuinely reached 29 inches. Also measure the ceiling clearance above the dryer – stacked pairs add 6 to 10 inches of height over a side-by-side, and you need at least an inch of breathing room above the dryer for vent hose routing.
Build Material: Steel vs Plastic vs Coated
Steel kits with a chrome or anti-rust coating are the most durable and the most common in our roundup. Plastic kits like the Frigidaire STACKIT2 are lighter and immune to rust, but they tend to fatigue under sustained vibration. Coated steel is the sweet spot for most homes – it shrugs off humidity, holds up to a decade of spin cycles, and costs only marginally more than bare steel.
Mix-and-Match Brand Stacking Rules
You can absolutely stack different brands of washers and dryers, as long as both are rated stackable, both share the same depth and width, and you use a universal or cross-compatible kit. The Care + Protect and Kiss Core kits are designed for exactly this case. The one rule we never break: do not stack a top-load washer under a dryer. Top-load washers vibrate too much during agitation, and even the best kit cannot keep the dryer stable on top of one.
Installation Time and DIY Difficulty
Plan on 10 to 45 minutes for the install. OEM kits with paper instructions and screwdrivers are the fastest. Universal kits with ratchet straps are next. Aftermarket kits with unclear instructions or stripped screws are the slowest. Two-person lifts are mandatory for full-size dryers – even a 110 pound dryer is awkward to set on top of a washer alone, and dropping it will damage both appliances.
Frequently Asked Questions
Are washer dryer stacking kits universal?
Most washer dryer stacking kits are not fully universal. OEM kits fit only the specific brand and model they were engineered for, and brand-specific aftermarket kits like the Funmit KSTK1 or Arpfule GFA28KITN fit one footprint. Truly universal kits like the Care + Protect 35602039 and Kiss Core fit a range of 24 to 29 inch front-load pairs across brands, which is the closest you can get to universal in this category. Always measure your washer and dryer depth and width before buying a universal kit, and confirm the dryer model is rated stackable.
Can you mix and match a stackable washer and dryer?
Yes, you can mix and match a stackable washer and dryer as long as both units are rated stackable by their manufacturers, share the same width and depth, and you use a compatible stacking kit. Many homeowners pair an LG washer with a Samsung dryer or a Whirlpool washer with a GE dryer using a universal kit. The key check is the manufacturer’s stackable rating, which is usually printed on the data plate or listed in the owner’s manual. Do not stack a top-load washer under a dryer under any circumstances.
Can I stack different brands of washers and dryers together?
You can stack different brands as long as both units are front-load, both are rated stackable, and the dimensions match. Universal stacking kits like the Care + Protect and Kiss Core are designed specifically for cross-brand setups. Reddit threads in r/Appliances show owners running LG over Samsung, Whirlpool over GE, and even Bosch over Electrolux with universal kits and no vibration issues. The one caution is warranty coverage – mixing brands means a service tech may blame the other brand’s appliance for any issue, so keep your receipts and your install manual.
Are all front load washer and dryers stackable?
No, not all front-load washers and dryers are stackable. Most 27 inch and 24 inch front-load pairs are stackable, but some compact 24 inch units and some built-in models are designed only for side-by-side or under-counter installation. Check the data plate inside the door or the owner’s manual for the word stackable. If the manual is missing, the manufacturer’s model number lookup tool on its support website will confirm whether your specific unit can be stacked.
Do you have to stack a stackable washer and dryer?
No, you do not have to stack a stackable washer and dryer. Stackable just means the unit is engineered to be safe to stack, not that stacking is required. Side-by-side installation is perfectly fine for stackable front-load pairs, and many homeowners prefer it for ergonomics – no reaching up to load the dryer. Stacking only becomes necessary when floor space is limited, such as in a closet, a small condo, or a tight laundry nook.
How tall are stackable washer and dryers?
A stacked front-load washer and dryer pair typically stands 74 to 78 inches tall, which is roughly 6 feet 2 inches to 6 feet 6 inches. That is the washer height plus the dryer height plus 1 to 3 inches of kit clearance. Most closet laundry installations need at least 80 inches of vertical clearance to leave room for venting and dryer hose routing. Measure from the floor to the lowest obstruction above the planned install location before ordering a stacking kit.
Which Washer Dryer Stacking Kit Should You Buy in 2026?
After testing all eight kits in this roundup, our top pick remains the Care + Protect 35602039 universal kit for its cross-brand compatibility, integrated sliding shelf, and quiet operation. It is the easiest kit to recommend when the buyer is not 100 percent sure of the washer and dryer model numbers, and it has the deepest review base of any kit we tested.
If you want the strongest bracket for an LG or Samsung 27 inch pair, go with the Funmit KSTK1 and its 250 pound chrome-coated frame. For Samsung owners who want OEM peace of mind, the SKK-8K is worth the premium. For Whirlpool Duet and Epic owners, the original 8541503 OEM kit is the only bracket that fits the older platform correctly. GE 28 inch owners get a purpose-built fit from the Arpfule GFA28KITN, renters and mixed-brand setups are best served by the Kiss Core universal kit, and anyone on a strict budget running a Whirlpool, Maytag, or Kenmore pair should grab the Romalon W10869845. Frigidaire FTFB4000FS and FEQB4000ES owners get a guaranteed-fit OEM part with the STACKIT2.
Whichever kit you choose, measure twice before you order, lift the dryer with a helper, and check the latest compatibility list on the manufacturer’s page before you drill any holes. A 30 minute install with the right bracket will give you a quiet, stable stacked laundry pair for the next decade.
